2019年第8期共收录47篇
1. Cyclone Device Collecting Eggshell Membranes and Eggshells Separately from Eggshells Mixture
Accession number: 20194207539214
Title of translation:
Authors: Chi, Yuan (1); Li, Mengfu (1); Yang, Yuebin (1); Sui, Angbo (1); Chi, Yujie (2)
Author affiliation: (1) College of Engineering, Northeast Agricultural University, Harbin; 150030, China; (2) College of Food Science, Northeast Agricultural University, Harbin; 150030, China
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 339-350
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: In order to reduce the pollution on the environment caused by waste eggshells, a method of collecting eggshell membranes and eggshells separately from eggshells mixture was explored, which acquired respective added value. Based on the Fluent-EDEM coupling simulation, the influences of cyclone structure parameters such as the diameter and height of the cleaning cylinder on the flow field characteristics, particles trajectories and particles distribution in the cyclone were studied. According to the simulation results, the structure parameters of the cyclone were determined within a reasonable range. In the eggshells and membranes collecting test, the cyclone top structure, fan rotational speed, feeding motor rotational speed and feed rate were taken as test factors, and the cleaning rate and recovery rate of eggshell membranes were taken as evaluation indexes. The simulation results showed that the flow field formed in the cleaning cylinder was that velocity was high in upward direction in the central columnar area and low in downward direction in the peripheral area, and air pressure was the lowest at the air riser, which were conducive to collecting eggshells and eggshell membranes. Increasing the diameter of cleaning cylinder would cause eggshells mixture reflux. Increasing the height of the cylinder would lead to excessive energy loss in the cylinder and low recovery rate of eggshell membranes, otherwise too small height of the cylinder would lead to small energy loss, high airflow velocity in the cylinder and low cleaning rate of eggshell membranes. The test results showed that the recovery rate of eggshell membranes adapting cone top was higher than that of flat top. If the speed of materials inlet was increased, the eggshells mixture would move against the cylinder wall due to the centrifugal force, which can not separate eggshells and eggshell membranes effectively. The experimental results showed when the feed rate was 500 g/s, the fan rotational speed was 2 892 r/min and the feeding motor rotational speed was 918 r/min, the eggshell membranes recovery rate was higher than 94%, and cleaning rate was higher than 96%. The result of verification test was close to that of optimization, and the optimization result was credible. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 28
Main heading: Membranes
Controlled terms: Air? - ?Air cleaners? - ?Cleaning? - ?Cylinders (shapes)? - ?Energy dissipation? - ?Flow fields? - ?Mixtures? - ?Recovery? - ?Speed
Uncontrolled terms: Centrifugal Forces? - ?Collecting separately device? - ?Coupling simulation? - ?Eggshell membranes? - ?Flow field characteristics? - ?Particles distribution? - ?Structure parameter? - ?Verification tests
Classification code: 451.2 Air Pollution Control? - ?525.4 Energy Losses (industrial and residential)? - ?631.1 Fluid Flow, General? - ?802.3 Chemical Operations? - ?804 Chemical Products Generally? - ?951 Materials Science
DOI: 10.6041/j.issn.1000-1298.2019.08.037
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
2. Interpolation Method of Arable Land Quality Grading Based on Barrier Factors
Accession number: 20194207539138
Title of translation:
Authors: Yang, Yongxia (1, 2); Guo, Yaping (1); Zhang, Han (1); Zhang, Lihong (1); Sang, Jing (1)
Author affiliation: (1) College of Land Science and Technology, China Agricultural University, Beijing; 100083, China; (2) Key Laboratory of Agricultural Land Quality, Monitoring and Control, Ministry of Natural Resources, Beijing; 100035, China
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 157-165 and 175
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: The survey and evaluation of cultivated land quality is an important basis for the protection of the “three in one” of the quantity, quality and ecology of cultivated land, and also an important cornerstone for ensuring national food security and maintaining sustainable agricultural development. In the mountainous and hilly areas, the estimation of the attribute values of the grading factors in the survey and evaluation of cultivated land quality grades is affected by the barriers of large and medium-sized mountain bodies, resulting in the misalignment of the attribute assignment results of the grading elements. Taking the Ping’an District of Qinghai Province as the research area, the method of estimating the attribute value of the grading factor based on the barrier factor was studied. The cross-validation was performed with the inverse distance weight interpolation and the spline function interpolation method. The results showed that different interpolation methods were basically consistent with the simulation of the spatial distribution trend of three grading factors. Because of the difference between the characteristics of the original data and the interpolation principle, the interpolation method based on the barrier factors was inconsistent to different soil properties, and the most suitable interpolation method for soil organic matter and effective soil thickness was the spline function interpolation based on the barrier factor. In the soil pH value interpolation, the inverse distance weight interpolation accuracy based on the barrier factor was the highest; the interpolation accuracy of soil organic matter and effective soil thickness in the study area was higher than the average absolute error, the average relative error, the root mean square error, and the relative root mean square error of the spline function interpolation without considering the blocking factor, respectively, by 11.23%, 10.98%, 7.54%, 9.20%, and 15.08%, 11.74%, 17.41%, 9.40%. Interpolation of organic matter and effective soil layer was performed by interpolation of spline function based on barrier factors. The determination coefficients between the measured and predicted values were 0.927 and 0.901, respectively. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 31
Main heading: Interpolation
Controlled terms: Agriculture? - ?Biogeochemistry? - ?Errors? - ?Food supply? - ?Function evaluation? - ?Grading? - ?Inverse problems? - ?Land use? - ?Mean square error? - ?Organic compounds ? - ?Quality control? - ?Soils? - ?Surveys
Uncontrolled terms: Barrier factors? - ?Cultivated land qualities? - ?Determination coefficients? - ?Hilly areas? - ?Inverse distance weight? - ?Root mean square errors? - ?Spatial interpolation? - ?Sustainable agricultural development
Classification code: 403 Urban and Regional Planning and Development? - ?481.2 Geochemistry? - ?483.1 Soils and Soil Mechanics? - ?804.1 Organic Compounds? - ?821 Agricultural Equipment and Methods; Vegetation and Pest Control? - ?822.3 Food Products? - ?913.3 Quality Assurance and Control? - ?921.6 Numerical Methods? - ?922.2 Mathematical Statistics
DOI: 10.6041/j.issn.1000-1298.2019.08.018
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
3. Structural Design and Test of Soil Steam Disinfection Needle in Panax notoginseng Field
Accession number: 20194207539183
Title of translation:
Authors: Wang, Fenghua (1); Song, Yan (1); Lai, Qinghui (1); Zhao, Wei (1)
Author affiliation: (1) Faculty of Agriculture and Food, Kunming University of Science and Technology, Kunming; 650500, China
Corresponding author: Lai, Qinghui(laiqinghui007@163.com)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 123-130
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: Aiming at the problem of continuous cropping obstacles that seriously restrict the sustainable development of Panax notoginseng planting, a needle steam output device was designed. The structural parameters of the disinfection needle were optimized and verified by the soil-bin test. The simulation experiments of the needle’s internal were carried out by Fluent software, the test results showed that the flow rate and pressure of the disinfection needle were increased, and no significant change in outlet temperature was found. The basic law of soil heating was verified by the soil-bin test. The soil can be heated to 90 in 5 minutes, and the heating efficiency of the lower soil was low, and that of the upper soil was high. In order to explore the effect of different structural parameters of the disinfecting needle on the warming effect of the soil, the number, diameter and steam emission angle of the hole on one side were selected as the test factors of the soil-bin test, and the time required for the soil to rise to 90 was selected as the test index, and orthogonal tests were carried out respectively to determine the optimal structural parameters of the disinfecting needle. When the number of single side orifices was 4, the diameter of the orifice was 2 mm, and the steam exit angle was 45°, the heating time of soil by the disinfection needle structure was the shortest, for 116 s. The optimal arrangement of disinfection needles was 6×6 layout, the optimal number was 36, and the spacing was 250 mm by the heat transfer simulation of Fluent porous media. The changes in soil organic matter and pH value after disinfection were tested, the soil environment after disinfection met the environmental requirements for the growth of Panax notoginseng. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 26
Main heading: Soils
Controlled terms: Disinfection? - ?Heat transfer? - ?Needles? - ?Orifices? - ?Porous materials? - ?Software testing? - ?Steam? - ?Structural design? - ?Structural optimization? - ?Sustainable development
Uncontrolled terms: Continuous cropping obstacles? - ?Environmental requirement? - ?Heat transfer simulation? - ?Heating efficiencies? - ?Optimal arrangement? - ?Panax notoginseng? - ?Soil organic matters? - ?Structural parameter
Classification code: 408.1 Structural Design, General? - ?483.1 Soils and Soil Mechanics? - ?641.2 Heat Transfer? - ?723.5 Computer Applications? - ?921.5 Optimization Techniques? - ?951 Materials Science
DOI: 10.6041/j.issn.1000-1298.2019.08.014
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
4. Online Application of Soybean Meal NIRS Quantitative Analysis Model from Laboratory to Factory
Accession number: 20194207539133
Title of translation:
Authors: Yang, Zengling (1); Yang, Qinkai (1); Shen, Guanghui (1); Mei, Jiaqi (1); Huang, Yuanping (1); Han, Lujia (1)
Author affiliation: (1) College of Engineering, China Agricultural University, Beijing; 100083, China
Corresponding author: Han, Lujia(hanlj@cau.edu.cn)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 358-363 and 371
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: Aiming to explore the feasibility of the online near-infrared quantitative analysis model of soybean meal from laboratory to factory transfer and application. Totally 117 soybean meal samples were collected nationwide and used, the near-infrared quantitative analysis models of moisture and crude protein were established in the laboratory by partial least squares method, two kinds of near-infrared online equipment installation methods were used in feed production enterprises. The laboratory models of near-infrared quantitative analysis of soybean meal quality were transferred to feed production enterprises for online application by two different methods. The results showed that laboratory model can rapidly predict the content of moisture and crude protein in soybean meal (RSD was below 10%), RP2 of moisture and crude protein were 0.83 and 0.86, RPD value of moisture and crude protein were 2.40 and 2.55, which meant that the model effect was fine; laboratory models were transferred to feed production enterprises for online analysis by different methods such as model correction and sample expansion, the deviation between the predicted value and the measured value was small and stable. The requirement for online detection can be achieved. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 28
Main heading: Quality control
Controlled terms: Infrared devices? - ?Laboratories? - ?Least squares approximations? - ?Moisture? - ?Near infrared spectroscopy? - ?Proteins
Uncontrolled terms: Calibration transfer? - ?Equipment installation? - ?Model corrections? - ?On-line applications? - ?On-line detection? - ?Partial least-squares method? - ?Quantitative analysis model? - ?Soybean meal
Classification code: 804.1 Organic Compounds? - ?913.3 Quality Assurance and Control? - ?921.6 Numerical Methods
DOI: 10.6041/j.issn.1000-1298.2019.08.039
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
5. Simulation and Test of Seedling Pot Grabbing by Spade End-effector
Accession number: 20194207539114
Title of translation:
Authors: Tong, Junhua (1, 2); Shi, Hufeng (1); Wu, Chuanyu (1, 2); Ding, Yuhua (1); Zhao, Xiong (1); Wang, Rongyang (1)
Author affiliation: (1) Faculty of Machinery and Automation, Zhejiang Sci-Tech University, Hangzhou; 310018, China; (2) Zhejiang Provincial Key Laboratory of Transplanting Equipment and Technology, Hangzhou; 310018, China
Corresponding author: Wu, Chuanyu(cywu@zstu.edu.cn)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 107-116
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: In the mechanical replugging task in greenhouse, the residual matrix in plastic pan would not be beneficial for healthy seedling replugging which was caused by the end-effector removing bad seeding in previous transplanting procedure. A kind of spade end-effector was developed relatively to the needle-type for the removing task. The aim was to reduce the residual matrix in the cell by increasing the contact area between the end-effector and matrix. The reasons of residual matrix in the end-effector grabbing procedure were deduced by the statics. The seedling pot would break and the matrix would collapse while the maximum cohesion in matrix was less than the total resistance which was synthesized by the gravity of seedling pot and the adhesion between the matrix and plug tray. Based on the discrete element analysis method, the seedling pot grabbing procedure by the spade end-effector was simulated by the enhanced discrete element method (EDEM). It was found that the performance of residual matrix was reduced while the cohesion of soil matrix was increased. Therefore, taking the matrix ratio and relative moisture content as the main factors and designing the experiment through the combined disc tests to measure the matrix adhesion and cohesion in the different main factors of matrix ratio and relative moisture. The aim was to find the conditions of matrix ratio and relative moisture while the cohesion was bigger than adhesion. The difference between cohesion and adhesion was the largest under the conditions of 60% of relative moisture content and 6:3:1 (peat:vermiculite:perlite) of matrix ratio. The average matrix removal rate by the spade end-effector reached 70.8%, which was superior to other conditions. Most of the matrix in the plastic hole can be removed under the conditions. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 22
Main heading: Adhesion
Controlled terms: End effectors? - ?Moisture? - ?Moisture determination
Uncontrolled terms: Contact areas? - ?Disc tests? - ?Discrete element analysis? - ?Matrix removal? - ?Residual matrices? - ?Soil matrices? - ?Total resistance? - ?Transplanter
Classification code: 731.5 Robotics? - ?944.2 Moisture Measurements? - ?951 Materials Science
DOI: 10.6041/j.issn.1000-1298.2019.08.012
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
6. Influences of Interactions of Plastic Film Mulching and Controlled/Slow Release Fertilizer on Growth and Nitrogen Utilization of Spring Maize
Accession number: 20194207539245
Title of translation: /
Authors: Zhou, Xiang (1, 2); Chen, Shang (1, 2); He, Chuan (1, 2); Xu, Fang (1, 2); Feng, Hao (2, 3); He, Jianqiang (1, 2)
Author affiliation: (1) Key Laboratory of Agricultural Soil and Water Engineering in Arid Areas, Ministry of Education, Northwest A&F University, Yangling; Shaanxi; 712100, China; (2) Institute of Water-saving Agriculture in Arid Areas of China, Northwest A&F University, Yangling; Shaanxi; 712100, China; (3) Institute of Water and Soil Conservation, Chinese Academy of Sciences and Ministry of Water Resources, Yangling; Shaanxi; 712100, China
Corresponding author: He, Jianqiang(jianqiang_he@nwsuaf.edu.cn)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 321-330
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: In order to study the effects of interactions of plastic film mulching and controlled/slow release fertilizer on the growth and nitrogen utilization of spring maize, field experiments were conducted at two sites in Yongshou and Changwu on the Weibei Dryland in Shaanxi Province in 2017. The experiments included two cropping patterns (e.g. full plastic film mulching, M; flat planting, F), and three types of nitrogen fertilizer (e.g. urea fertilizer, U; control release fertilizer, CU; slow release fertilizer, SU). A total of six different treatments were involved consequently. Then the influences of different interactions on the growth of spring maize were evaluated through comparisons of leaf area index (LAI), biomass accumulation, grain yield and nitrogen utilization under different treatments. The results showed that plastic film mulching could significantly increase spring maize yield by 14.0%~34.2% compared with the flat planting treatment. The plastic mulching treatment increased nitrogen content in the 0~40 cm soil, reduced nitrogen leaching to deep soil layers, and increased nitrogen use efficiency by 9.5%~23.7%. Under plastics film mulching, the leaf area aging rate of urea-based treatment (U) was higher than that of the coated controlled release fertilizer treatment (CU) and the urea added DCD treatment (SU) by 42.0%~51.6% and 55.4%~66.3%, respectively. The dry matter accumulation rate of urea-based treatment (U) from flowering to maturity was lower than that of the coated controlled release fertilizer treatment (CU) and the urea added DCD treatment (SU) by 112.7%~155.2% and 30.3%~44.7%, respectively. Under plastic film mulching, nitrogen transport amount and efficiency of vegetative organs of the controlled/slow release fertilizer treatment were higher than that of the urea-based treatment (U) by 4.2%~78.1%, and the nitrogen absorption efficiency and nitrogen fertilizer utilization efficiency were higher than the urea treatment (U) by 6.6%~24.2%. Therefore, the interactions of plastic film mulching and controlled/slow release fertilizer can alleviate premature aging of spring maize, promote the growth, and increase the efficiency of nitrogen fertilizer utilization of spring maize to some extent. Thus, the combination of plastic film mulching and controlled/slow release fertilizer can be used as an effective measure to increase corn yield in the Weibei Dryland in Shaanxi Province. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 40
Main heading: Film growth
Controlled terms: Efficiency? - ?Metabolism? - ?Plants (botany)? - ?Plastic coatings? - ?Plastic films? - ?Soils? - ?Urea? - ?Urea fertilizers
Uncontrolled terms: Dryland? - ?Nitrogen uptake? - ?Plastic film mulching? - ?Premature aging? - ?Spring maize
Classification code: 483.1 Soils and Soil Mechanics? - ?804.1 Organic Compounds? - ?817.1 Polymer Products? - ?817.2 Polymer Applications? - ?913.1 Production Engineering
DOI: 10.6041/j.issn.1000-1298.2019.08.035
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
7. Visual Expression Method of Leaf Traits Based on Morphological Reconstruction
Accession number: 20194207539258
Title of translation:
Authors: Tang, Weidong (1); Liu, Zhenwen (1); Liu, Dongsheng (1); Long, Mansheng (1)
Author affiliation: (1) College of Electronics and Information Engineering, Jinggangshan University, Ji’an; 343009, China
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 249-256 and 212
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: Leaf traits can provide important references for canopy light distribution, growth and development, and monitoring of external environment. Aiming at the problems of simplicity and abstraction in the process of processing and expressing leaf traits, a leaf traits fusion method based on morphological reconstruction was proposed. Taking the growth of cucumber leaves in greenhouse as an example, the effective accumulated temperature and growth rate were taken as characteristic parameters to establish the leaf morphogenesis model. The parametric spline curve was used to describe the geometric shape of leaf edge and vein. The dichotomy method was used to divide the leaf edge and vein curve recursively in order to realize the meshed subdivision of the blade surface. Combining with the leaf color texture information mapping model, a visual expression algorithm of leaf characteristics was introduced. The experimental verification results showed that the relative errors between the simulated and observed values of leaf traits obtained by this method were small, and the consistency was good, which demonstrated the method had certain feasibility and validity. Furthermore, in comparison with the typical statistical model and point cloud reconstruction model, the experimental results indicated that the square of correlation coefficients was above 0.95, and the root mean square deviation was no more than 0.236. Compared with traditional modeling methods, the proposed model had higher fitting degree and better reliability, by which it can effectively realize the dynamic simulation of cucumber leaf traits, which could provide a basis for real-time grasping and forecasting of plant growth and development. This method not only provided a reference for the dynamic tracking and management of greenhouse crop production, but also laid a theoretical foundation for the further study of the role of plants under various environmental factors. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 31
Main heading: Greenhouses
Controlled terms: Cultivation? - ?Fusion reactions? - ?Plants (botany)? - ?Textures? - ?Three dimensional computer graphics
Uncontrolled terms: Characteristic parameters? - ?Cucumber? - ?Experimental verification? - ?Greenhouse crop production? - ?Leaf traits? - ?Morphological reconstruction? - ?Root mean square deviations? - ?Visual expression
Classification code: 723.2 Data Processing and Image Processing? - ?821.3 Agricultural Methods? - ?821.6 Farm Buildings and Other Structures? - ?932.2.1 Fission and Fusion Reactions
DOI: 10.6041/j.issn.1000-1298.2019.08.027
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
8. Optimization Design and Experiment of Full-automatic Strawberry Potted Seedling Transplanting Mechanism
Accession number: 20194207539328
Title of translation:
Authors: Xu, Chunlin (1); Lü, Zhijun (1); Xin, Liang (1); Zhao, Yun (1)
Author affiliation: (1) College of Engineering, Northeast Agricultural University, Harbin; 150030, China
Corresponding author: Xin, Liang(xinliang@neau.edu.cn)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 97-106
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: To realize the mechanized transplanting of the strawberry pot seedlings, according to the agricultural requirements of strawberry cultivation, a full-automatic strawberry potted seedling transplanting mechanism with non-circular gear designed by using fitted Hermite curves as a the non-circular gear pitch curve was proposed, using only one mechanism to complete the four actions such as seedling picking, transporting, digging hole and transplanting. And the transplanting mechanism satisfied the requirements of the strawberry transplanting trajectory and attitude, ensuring the precise coordination of the seedling and the hole. Based on the working principle of the transplanting mechanism, the theoretical model and kinematic characteristics of the transplanting mechanism were analyzed, and the computer-aided analysis and optimization software based on Visual Basic 6.0 was designed and used to obtain a set of parameters which met the transplanting requirements. A virtual prototype of the transplanting mechanism was established and simulated by using the ADAMS software. The physical prototype of the transplanting mechanism was developed by the 3D printing technology, and the transplanting mechanism was mounted on a strawberry transplanting test bench on which high-speed photography experiment was conducted. The results of the theoretical analysis, virtual test, and physical prototype test were essentially identical, which verified the correctness of the mechanism design. The performance test showed that the success rate of seedling picking was 92%, the success rate of planting was 85%, and the average planting distance was 172.9 mm, the test revealed the depth, length and width of the digging holes met the transplant requirements of strawberry potted seedling. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 33
Main heading: Fruits
Controlled terms: 3D printers? - ?Computer aided analysis? - ?Cultivation? - ?High speed photography? - ?Machine design? - ?Testing? - ?Virtual reality? - ?Visual BASIC
Uncontrolled terms: Kinematic characteristics? - ?Non-circular gears? - ?Optimization design? - ?Optimization software? - ?Precise coordination? - ?Seedling transplanting? - ?Strawberry potted seedling? - ?Transplanting mechanisms
Classification code: 601 Mechanical Design? - ?723 Computer Software, Data Handling and Applications? - ?742.1 Photography? - ?745.1.1 Printing Equipment? - ?821.3 Agricultural Methods? - ?821.4 Agricultural Products
DOI: 10.6041/j.issn.1000-1298.2019.08.011
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
9. Distribution Characteristics of Droplet Size in Rice Field and Wind Tunnel Simulation Test under Airflow Operation
Accession number: 20194207539152
Title of translation:
Authors: Li, Jiyu (1, 2); Guo, Shuang (1, 2); Yao, Weixiang (1, 2); Zhan, Yilong (1, 2); Li, Yifan (1, 2)
Author affiliation: (1) College of Engineering, South China Agricultural University, Guangzhou; 510642, China; (2) National Center for International Collaboration Research on Precision Agricultural Aviation Pesticides Spraying Technology (NPAAC), South China Agricultural University, Guangzhou; 510642, China
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 148-156
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: In order to investigate the effect of airflow vortex operation on the droplets size distribution of aerial spray, the XR-Teejet 110015 pressure fan-shaped nozzle was used as an example, and was tested in the wind tunnel and field respectively. The wind speed in the field was simulated by the airflow velocity of the wind tunnel test, and three spray pressures were set, the droplet size were measured by the laser particle size analyzer. In the field experiment, a four-rotor unmanned aerial vehicle (UAV) was used as the platform to spray on target, then the droplet size distribution regular of each vortex shape formed by different interaction between rotor airflow and canopy were analyzed. The results showed that under the conditions of wind tunnel, each test nozzle was in a very fine atomization level, and the atomization performance was well and stable. The formation of vortex state had a significant effect on the droplets size distribution in the field test. Under the three vortex states, the comprehensive average proportion of droplet size less than 200 μm was 73.52%, 74.21% and 84.20%, respectively, which was consistent with the wind tunnel test results, but the DV0.1, DV0.5 and DV0.9 of the droplet in the field test were significantly higher than that in the wind tunnel test. The droplets size of the obvious vortex state and small range vortex had a relatively flat distribution trend in the various layers of the crop, and the variation coefficient of volume median diameter in each layer was between 3.96% and 10.66%, but the no vortex state showed a large volatility, and the coefficient of variation was in the range of 9.49%~17.11%, which indicated that the relatively obvious vortex state was conducive to the penetration of droplets in the vertical space and achieved better application effect. The research results can provide reference and guidance for the accurate spraying operation of agricultural UAV, and have important significance for improving the utilization rate of pesticides in aerial spraying operations. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 30
Main heading: Wind tunnels
Controlled terms: Air? - ?Air navigation? - ?Antennas? - ?Atomization? - ?Drops? - ?Particle size? - ?Particle size analysis? - ?Size distribution? - ?Spray nozzles? - ?Unmanned aerial vehicles (UAV) ? - ?Vortex flow? - ?Wind stress
Uncontrolled terms: Airflow operation? - ?Atomization performance? - ?Coefficient of variation? - ?Distribution characteristics? - ?Droplet size distributions? - ?Laser particle size analyzer? - ?Vortex state? - ?Wind-tunnel simulation
Classification code: 431.5 Air Navigation and Traffic Control? - ?443.1 Atmospheric Properties? - ?631.1 Fluid Flow, General? - ?651.2 Wind Tunnels? - ?652.1 Aircraft, General? - ?802.3 Chemical Operations? - ?804 Chemical Products Generally? - ?922.2 Mathematical Statistics? - ?951 Materials Science
DOI: 10.6041/j.issn.1000-1298.2019.08.017
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
10. Effects of Jet Cavitation on Maillard Reaction and Conjugate Structure and Emulsifying Properties of Soy Protein Isolate
Accession number: 20194207539285
Title of translation:
Authors: Li, Liang (1); Zhou, Yan (1); Teng, Fei (1); Guo, Zengwang (1); Tian, Tian (1); Wang, Zhongjiang (1)
Author affiliation: (1) College of Food Science, Northeast Agricultural University, Harbin; 150030, China
Corresponding author: Wang, Zhongjiang(wzjname@126.com)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 372-378
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: Maillard reaction is a non-enzymatic, natural and non-toxic method to modify protein or polysaccharide. The effect of jet cavitation powers on the process of soy protein isolate-dextran Maillard reaction was studied, to improve the defect of low efficiency, long reaction time and high energy consumption on the Maillard modified soy protein isolate. The effects of jet cavitation power on the products structure and emulsifying properties were further studied, which provided theoretical support for improving the functional properties of the soy protein isolate with Maillard reaction. The results showed that the jet cavitation treatment induced the molecular structure of the soy protein isolate and exposed more reactive sites, increased the activity of protein and promoted the Maillard reaction process. When the jet cavitation pressure was 1.5 MPa, the SPI and dextran Maillard reaction process was the largest, A420 was 0.55, browning was increased by 17.02%, A249 was significant increased (P ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 31
Main heading: Emulsification
Controlled terms: Cavitation? - ?Chemical reactions? - ?Dextran? - ?Energy utilization? - ?Fluorescence? - ?Glycosylation? - ?Hydrophobicity? - ?Light absorption? - ?Proteins? - ?Structural properties ? - ?Structure (composition)
Uncontrolled terms: Emulsifying property? - ?Fluorescence intensities? - ?Functional properties? - ?High energy consumption? - ?Maillard reaction? - ?Maillard reaction products? - ?Soy protein isolates? - ?Surface hydrophobicity
Classification code: 461.9 Biology? - ?525.3 Energy Utilization? - ?631.1.1 Liquid Dynamics? - ?741.1 Light/Optics? - ?802.2 Chemical Reactions? - ?802.3 Chemical Operations? - ?804.1 Organic Compounds? - ?931.2 Physical Properties of Gases, Liquids and Solids? - ?951 Materials Science
DOI: 10.6041/j.issn.1000-1298.2019.08.041
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
11. Kinematics Analysis and Experiment on Pneumatic Flexible Fruit and Vegetable Picking Manipulator
Accession number: 20194207539192
Title of translation:
Authors: Zhao, Yunwei (1); Geng, Dexu (1); Liu, Xiaomin (1); Sun, Guodong (1)
Author affiliation: (1) School of Mechanical Engineering, Beihua University, Jilin; 132021, China
Corresponding author: Geng, Dexu(gengdx64@163.com)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 31-42
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: A multi-degree-of-freedom fruit and vegetable picking manipulator with a flexible arm was developed according to the bending flexible pneumatic actuators which had large bending capabilities. The static characteristic and deformation of the bending actuators were studied, and then the kinematics model of picking manipulator was established with multiple tandem joints by using homogeneous coordinate transformation and piece-wise constant curvature model. At the same time, the grasp force of the picking manipulator when grasp the different objects was analyzed. In order to adapt to different grasp objectives, the grab modes were set when the robot picked the objects, and then the relationship between finger output force and air pressure was studied. Also, the picking manipulator movement track and work space were got by markers position change with air pressure. Through the simulation of the manipulator by Matlab software, it can be seen that the picking robot can complete five-finger grasping, four-finger grasping and two-finger grasping gestures by cooperation of flexible fingers. Subsequently, the relevant experiments were carried out to verify the theoretical model. A prototype of the picking manipulator was made and a variety of fruit and vegetable simulation picking experiments were carried out in the experimental environment. The results of harvesting experiments showed that the picking manipulator had flexible movements and high adaptability to the shape of object. It had multiple grasping modes and was easy to control, which can grasp objects of different shapes and weights stably, especially suitable for automatic picking of spherical and cylindrical fruits and vegetables. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 23
Main heading: Manipulators
Controlled terms: Atmospheric pressure? - ?Bending (deformation)? - ?Degrees of freedom (mechanics)? - ?Fruits? - ?Kinematics? - ?MATLAB? - ?Pneumatic actuators? - ?Pneumatic drives? - ?Pneumatic equipment? - ?Pneumatics ? - ?Robotic arms? - ?Ultrasonic devices? - ?Vegetables
Uncontrolled terms: Experimental environment? - ?Flexible pneumatic actuator? - ?Fruits and vegetables? - ?Homogeneous coordinate transformations? - ?Kinematic model? - ?Multi degree-of-freedom? - ?Picking manipulators? - ?Static characteristic
Classification code: 443.1 Atmospheric Properties? - ?632.3 Pneumatics? - ?632.4 Pneumatic Equipment and Machinery? - ?731.5 Robotics? - ?732.1 Control Equipment? - ?753.2 Ultrasonic Devices? - ?821.4 Agricultural Products? - ?921 Mathematics? - ?931.1 Mechanics
DOI: 10.6041/j.issn.1000-1298.2019.08.004
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
12. Modeling and Experiment of Column-type Giant Magnetostrictive Vibration Energy Harvesting Device
Accession number: 20194207539205
Title of translation:
Authors: He, Zhongbo (1); Bai, Guo (1); Zheng, Jiawei (2); Zhou, Jingtao (1); Liu, Guoping (1)
Author affiliation: (1) Department of Vehicle and Electrical Engineering, Army Engineering University, Shijiazhuang; 050003, China; (2) Unit 32184 of PLA, Beijing; 100072, China
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 400-409
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: Vibration energy harvesting technology is an important way to alleviate energy pressure and has broad application prospects in the field of power supply for micro devices. The giant magnetostrictive vibration energy harvesting technology has attracted attention with the excellent performance of giant magnetostrictive materials (GMM). In view of the shortcomings of the current theoretical research on giant magnetostrictive vibration energy harvesting, a column-type giant magnetostrictive energy harvesting device (GMEHD) was designed based on the material properties of GMM, and its working principle was introduced. The input and output model of the device was established and the output voltage calculation formula was derived combining with the structural characteristics of GMEHD. The response of the system under sinusoidal excitation was solved. According to the coil structure, the coil turns were optimized through circuit analysis. The finite element model of GMEHD was established by simulation software COMSOL Multiphysics and the simulation results were obtained. GMEHD was made on the basis of the above. The prototype test system was built, and the GEMHD output electromotive force time curve under different frequency sinusoidal forces was obtained, and compared with the model calculation value and simulation results. The results showed that under the sinusoidal excitation of 1Hz, 10Hz and 50Hz, the GEMHD output electromotive force amplitudes were 2 mV, 15 mV and 75 mV, respectively, and the phase ahead the input force π/2. The model calculation and simulation value fitted well, which verified the accuracy of the model and provided a reference for the next step in the optimization design. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 20
Main heading: Magnetostrictive devices
Controlled terms: Computer software? - ?Electromotive force? - ?Energy harvesting? - ?Experiments? - ?Finite element method? - ?Vibration analysis
Uncontrolled terms: Coil optimization? - ?Energy harvesting device? - ?Giant magnetostriction? - ?Giant magnetostrictive? - ?Giant magnetostrictive materials? - ?Sinusoidal excitations? - ?Structural characteristics? - ?Vibration energy harvesting
Classification code: 525.5 Energy Conversion Issues? - ?723 Computer Software, Data Handling and Applications? - ?801.4.1 Electrochemistry? - ?901.3 Engineering Research? - ?921.6 Numerical Methods
DOI: 10.6041/j.issn.1000-1298.2019.08.045
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
13. Optimal Configuration for Gasoline-Solar Complementary Driven Traction Device of Hard-hose Traveler
Accession number: 20194207539292
Title of translation:
Authors: Li, Dan (1, 2); Zhu, Delan (1, 2); Lin, Mingyue (1, 2); Wu, Yamei (1, 2); Zhao, Hang (1, 2); Wang, Rong (1, 2)
Author affiliation: (1) College of Water Resources and Architectural Engineering, Northwest A&F University, Yangling; Shaanxi; 712100, China; (2) Key Laboratory of Agricultural Soil and Water Engineering in Arid Areas, Ministry of Education, Northwest A&F University, Yangling; Shaanxi; 712100, China
Corresponding author: Zhu, Delan(dlzhu@126.com)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 131-139
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: Nowadays, the hose-drawn travelers have been gaining more popularity worldwide, especially in China. The sprinkler cart and polyethylene (PE) pipe need to be dragged to the start position of spray before the hose-drawn traveler working. For this problem, tractor is mostly used, but it often causes damage to soil and crops. In order to solve the problem, a supporting traction device for the hose-drawn traveler was proposed, which was driven by gasoline-solar complementary power supply system. To explore the power matching design method of the gasoline-solar complementary drive traction device, an optimal model for traction device configuration was established. According to the power demand of the device, the annual cost of power supply system was taken as the objective function, and the load loss of power supply probability and battery state of charge were the constraints. The number of PV panels, batteries as well as the rated power of the gasoline generator was used as the decision variables. In addition, the particle swarm optimization (PSO) algorithm based on penalty function was employed to solve the optimal model, and the optimal configuration of the power supply system was obtained. Then, application of the optimization model was carried out based on the weather condition and experimental periods in Yangling, Shaanxi Province. The power supply system configuration with the lowest annual cost was achieved. The optimal configuration was composed of two photovoltaic panels, four batteries and a gasoline generator with rated power of 3 kW, respectively. Correspondingly, the annual cost was 2 740.69 yuan. Finally, the power supply system was configured with the optimal solution and a three-day field operation test was conducted. The results showed that the generated power of the system was always greater than the consumed power at different periods and different weather. During the whole test, the accumulated generated power and consumed power of the system were 5.01 kW?h and 4.71 kW?h, respectively, and the optimal configuration results were able to meet the operational requirements of the device. It was showed that the proposed method was appropriate and the power supply system was with high reliability. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 32
Main heading: Gasoline
Controlled terms: Charging (batteries)? - ?Electric power systems? - ?Hose? - ?Particle swarm optimization (PSO)? - ?Photovoltaic cells? - ?Secondary batteries
Uncontrolled terms: Battery state of charge? - ?Field test? - ?Hard-hose traveler? - ?Loss of power supply probability? - ?Operational requirements? - ?Optimal configuration? - ?Particle swarm optimization algorithm? - ?Traction devices
Classification code: 523 Liquid Fuels? - ?619.1 Pipe, Piping and Pipelines? - ?702.1.2 Secondary Batteries? - ?706.1 Electric Power Systems? - ?723 Computer Software, Data Handling and Applications
DOI: 10.6041/j.issn.1000-1298.2019.08.015
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
14. Evaluation and Analysis of Chinese Grain Production Water Use Efficiency Based on Super-efficiency DEA Model
Accession number: 20194207539346
Title of translation: DEA
Authors: Tan, Zhongxin (1); Guo, Xiangyu (1)
Author affiliation: (1) College of Economics and Management, Northeast Agricultural University, Harbin; 150030, China
Corresponding author: Guo, Xiangyu(guoxy@neau.edu.cn)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 280-288
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: Water resource is one of the most important input factors in agricultural production. Despite the relative abundance of water resources, China is still considered as a water stressed country with approximately 2 100 m3 per capita per year. Aiming to construct the evaluation index system to comprehensively evaluate the water use efficiency and find out the problems concerning water as production input factors during the water usage process in China’s grain production. The super-efficiency DEA method was applied to evaluate the water use efficiency within China’s grain production sector from 2009 to 2014, and to find out the proper adjustment direction and adjustment level. Eventually the countermeasures and suggestions for improving grain production’s water use efficiency in China were put forward. The results showed that there were substantial differences in grain production’s water use efficiency among China’s four major economic zones. The northeast region had performed the highest efficiency level and possessed slightly fluctuate trend simultaneously, while the central and western regions revealed the lower efficiency level and greatly fluctuate trend. Last but not the least, the eastern region with the lowest efficiency level characteristic experienced the declining trait. In addition, there were significant differences in grain production’s water use efficiency among different provinces which was attributed to unreasonable water input allocation within the grain production’s sector; the serious problem of co-existence of water input redundancy and inadequacy phenomena, which precisely reflected the failure in mutual promotion between irrigation system and effective precipitation in China’s grain production sector. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 32
Main heading: Water resources
Controlled terms: Data envelopment analysis? - ?Efficiency? - ?Grain (agricultural product)
Uncontrolled terms: Agricultural productions? - ?Evaluation index system? - ?Grain production? - ?Projection analysis? - ?Super efficiency? - ?Super efficiency dea models? - ?Water stressed countries? - ?Water use efficiency
Classification code: 444 Water Resources? - ?821.4 Agricultural Products? - ?913.1 Production Engineering? - ?922 Statistical Methods
DOI: 10.6041/j.issn.1000-1298.2019.08.031
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
15. Diffusion Characteristics of Diesel Spray in Swirl Flows Field
Accession number: 20194207539325
Title of translation:
Authors: Wei, Yanju (1); Zhang, Xudong (1); Deng, Shengcai (1); Zhang, Jie (1); Liu, Shenghua (1); Zhang, Meijuan (2)
Author affiliation: (1) School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an; 710049, China; (2) School of Automobile and Traffic Engineering, Wuxi Institute of Technology, Wuxi; 214121, China
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 394-399
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: The combustion process of internal combustion engine is greatly influenced by the swirl flow in combustion chamber, especially for diesel engines, where the diesel diffusion process in the swirl flow field is vital for combustion efficiency and the formation of pollutants, including nitric oxides and particulate matter. However, the spray diffusion process has not been lucubrated due to the difficulties of direct observation and the characterization of the internal flows in engine chamber. The diffusion characteristics of diesel spray in different intensity swirl flows were studied visualized. In this experiment, the combustion chamber of the internal combustion engine was simulated by a visualized rapid compression machine, and the diffusion characteristics of the diesel spray under three kinds of flow fields, such as tangential swirl flow field, oblique swirl flow field and straight swirl flow field, were studied. An electronically controlled injector with nozzle hole diameter of 0.2 mm was used. The injection pulse width was 5 ms, and the two injection pressures were selected to be 40 MPa and 60 MPa, respectively. The experimental results showed that the peak and valley values of diesel spray area and window area ratio were the highest in the tangential swirl flow field and the lowest in the straight swirl flow field under the same injection pressure and fuel injection pulse width. The process from the start to the complete mixing of the spray was the shortest in the oblique swirl flow field and the longest in the straight swirl flow field. The diffusion time of the spray oil was inversely proportional to the tangential velocity of the swirl flow and the fuel injection pressure. The results can provide reference for the design of air movement organization in diesel combustion chamber. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 19
Main heading: Diesel engines
Controlled terms: Combustion chambers? - ?Diffusion? - ?Flow fields? - ?Fuel injection? - ?Fuels? - ?Mixing? - ?Nitric oxide
Uncontrolled terms: Combustion efficiencies? - ?Diesel spray? - ?Diffusion characteristics? - ?Electronically controlled injector? - ?Fuel-air mixing? - ?Injection pulse width? - ?Rapid compression machine? - ?Swirl flow
Classification code: 612.2 Diesel Engines? - ?631.1 Fluid Flow, General? - ?654.2 Rocket Engines? - ?802.3 Chemical Operations? - ?804.2 Inorganic Compounds
DOI: 10.6041/j.issn.1000-1298.2019.08.044
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
16. Temperature Drift Characteristics and Compensation of SWR Soil Moisture Sensor
Accession number: 20194207539289
Title of translation: SWR
Authors: Zhao, Yandong (1, 2); Chen, Zhuang (1, 2); Gao, Zhitao (3); Zhang, Xin (4); Yu, Fuman (4)
Author affiliation: (1) School of Technology, Beijing Forestry University, Beijing; 100083, China; (2) Key Laboratory of State Forestry Administration for Forestry Equipment and Automation, Beijing; 100083, China; (3) Comprehensive Disaster Mitigation Centre, Institute of Disaster Prevention, Sanhe; 065201, China; (4) Tianjin Chuangshi Ecology and Landscape Construction Co., Ltd., Tianjin; 300110, China
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 257-263
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: In order to solve the problem that soil moisture sensor based on standing-wave ratio (SWR) principle is affected by temperature in long-term operation, a temperature compensation model based on binary regression analysis was presented. Based on the least square principle, the parameters of the compensation model were determined and the sensor was compensated. The temperature drift characteristics of SWR soil moisture sensor were analyzed from two aspects of hardware circuit and the measuring principle of soil water content. The experiment using high and low temperature alternating humid heat test box set temperature in the range of 5 to 45, the test results showed that the absolute deviation of the sensor to measure soil moisture content volume was between -2.65% and 2.22%, the maximum relative error was 29.76%, and the maximum mean square error was 2.211 9%. By fusing the SWR soil moisture sensor output value with the PT100 temperature sensor output value, the temperature compensation model was obtained by binary regression analysis based on the least squares optimization calculation, and the fitting determination coefficient was 0.998. The verification of the temperature compensation model depended on the sensor experimental data at different temperatures. The results showed that the absolute deviation distribution of the measurement results of SWR soil moisture sensor after temperature compensation was ranged from -0.26% to 0.69%, and the maximum relative error did not exceed 5.23%. The mean square error was decreased by an order of magnitude and the maximum was 0.157%. The temperature compensation model established can effectively reduce the influence of temperature on SWR soil moisture sensor and improve the accuracy and reliability of its measurement results. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 24
Main heading: Moisture control
Controlled terms: Error compensation? - ?Least squares approximations? - ?Mean square error? - ?Moisture meters? - ?Regression analysis? - ?Soil moisture? - ?Soil surveys? - ?Temperature distribution? - ?Water content
Uncontrolled terms: Determination coefficients? - ?Least square principle? - ?Least squares methods? - ?Least-squares optimization? - ?Maximum relative errors? - ?Soil moisture sensors? - ?Soil volumetric water contents? - ?Temperature compensation
Classification code: 483.1 Soils and Soil Mechanics? - ?641.1 Thermodynamics? - ?921.6 Numerical Methods? - ?922.2 Mathematical Statistics? - ?944.1 Moisture Measuring Instruments? - ?944.2 Moisture Measurements
DOI: 10.6041/j.issn.1000-1298.2019.08.028
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
17. Freshness Identification of Iberico Pork Based on Improved Residual Network
Accession number: 20194207539095
Title of translation:
Authors: Jiao, Jun (1); Wang, Wenzhou (1); Hou, Jinbo (2); Sun, Pei (3); He, Yutong (1); Gu, Lichuan (1)
Author affiliation: (1) School of Information &Computer, Anhui Agricultural University, Hefei; 230036, China; (2) Anhui Hongsen Internet of Things Co., Ltd., Bozhou; 236800, China; (3) College of Animal Science and Technology, Anhui Agricultural University, Hefei; 230036, China
Corresponding author: Gu, Lichuan(gulichuan@ahau.edu.cn)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 364-371
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: In order to improve the accuracy of pork freshness identification, a method for pork freshness identification based on improved residual network and transfer learning was proposed. First of all, the pork freshness was classified into seven grades, according to the aerobic plate count, coliform bacteria and pH value of pork combined with national pork food standards(national standards). The ResNet-50 model was trained with the PfidSet data set to have the ability of extracting image features. Then, the ResNet-50 model was improved by using model transferring and model fine-tuning in the following ways: firstly, replacing the full connection and classification layers of the ResNet-50 model with a 3-layer adaptive network; next, initializing the improved ResNet-50 model weights by using the network parameters trained on the PfidSet; then using LReLu-Softplus as the activation function of the adaptive network; finally, transferring the knowledge gained by the improved ResNet-50 model on the image data set of the pork sample to the task of Iberico pork freshness identification. A total of 23 427 images were selected to form the sample set. Then, 80% of the samples were randomly selected from the sample set to be used as the training set, and the remaining 20% for the test set. The test results showed that transfer learning could significantly improve the convergence speed and classification performance of the model, and data augmentation could increase the diversity of data, avoiding over-fitting phenomena. The accuracy of classification in transfer learning and data augmentation could reach as high as 94.5%. Moreover, the test method was an efficient method for classifying pork freshness. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 26
Main heading: Learning systems
Controlled terms: Aerobic bacteria? - ?Chemical activation? - ?Classification (of information)? - ?Coliform bacteria? - ?Image enhancement? - ?Meats? - ?Testing
Uncontrolled terms: Accuracy of classifications? - ?Activation functions? - ?Aerobic plate counts? - ?Classification performance? - ?Freshness? - ?Network parameters? - ?Pork? - ?Transfer learning
Classification code: 461 Bioengineering and Biology? - ?716.1 Information Theory and Signal Processing? - ?804 Chemical Products Generally? - ?822.3 Food Products
DOI: 10.6041/j.issn.1000-1298.2019.08.040
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
18. Design and Experiment on Multi-wheel Support Laser Land Leveler Hanging on Tractor
Accession number: 20194207539212
Title of translation:
Authors: Hu, Lian (1, 2); Du, Pan (1, 2); Luo, Xiwen (1, 2); Zhou, Hao (1, 2); Tang, Lingmao (1, 2); Su, Hongyi (1, 2)
Author affiliation: (1) Key Laboratory of Key Technology on Agricultural Machine and Equipment, Ministry of Education, South China Agricultural University, Guangzhou; 510642, China; (2) College of Engineering, South China Agricultural University, Guangzhou; 510642, China
Corresponding author: Luo, Xiwen(xwluo@scau.edu.cn)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 15-21
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: The laser land leveling of turning radius is large and the two-wheel support is easy to appear rim, which is not suitable for the accurate flat land of the small field. A multi-wheel support laser land leveling hanging on tractor was designed. By analyzing the floating function of the three-point suspension mechanism of the tractor and the multi-wheel support, the working principle of the laser-controlled flat shovel was realized. The mathematical model of the floating lifting shovel was established, and the structural parameters and working parameters of the grader were determined. Based on compaction analysis of the support wheel, the support wheel structure composing of two sets of rigid wheels was designed, which reduced the compaction and rim of the soft surface of the two-wheel support. The field test of the prototype showed that the operation performance of the machine was stable. The maximum elevation difference and standard deviation of the field were reduced from 20.8 cm and 4.48 cm to 7.3 cm and 1.72 cm, respectively. The cumulative percentage of the sampling points with the absolute difference between the sampling point and the mean was less than 3 cm was 91.94%, which can significantly improve the smoothing of the field and meet the requirements of accurate flat land in the small field. The soil compaction degree of the grid points before and after the flat ground was compared and analyzed, which indicated that the compaction effect of the multi-wheel support on the test field appeared at 0~17.5 cm. However, when the depth was more than 17.5 cm, the soil compaction was basically stable, and the surface soil of the whole field was compacted evenly. Moreover, the soft soil was moderately compacted after leveling, which reduced the sedimentation in the later stage of the soil and ensured the smoothness of the field. The percentage of an area that can not be leveled in the field corners of the traction leveler and hanging leveler was analyzed through the mapping method. The result showed that in the 100 m×100 m, 36.5 m×36.5 m and 25.8 m×25.8 m, the proportion of area that can not be leveled with traction leveler was 0.78%,5.8% and 19.4%, respectively, while the hanging leveler was only 0.09%, 0.68% and 2.25%, respectively, which showed that the hanging leveler was more suitable for small field flats. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 30
Main heading: Wheels
Controlled terms: Compaction? - ?Shovels? - ?Soil mechanics? - ?Soils? - ?Tractors (agricultural)? - ?Tractors (truck)
Uncontrolled terms: Absolute difference? - ?Flatness? - ?Hanging? - ?Land leveling? - ?Operation performance? - ?Structural parameter? - ?Suspension mechanism? - ?Tightness
Classification code: 483.1 Soils and Soil Mechanics? - ?601.2 Machine Components? - ?663.1 Heavy Duty Motor Vehicles
DOI: 10.6041/j.issn.1000-1298.2019.08.002
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
19. Tree Species Recognition Based on Overall Tree Image and Ensemble of Transfer Learning
Accession number: 20194207539329
Title of translation:
Authors: Feng, Hailin (1, 2); Hu, Mingyue (1, 3); Yang, Yinhui (1, 2); Xia, Kai (1, 3)
Author affiliation: (1) School of Information Engineering, Zhejiang A&F University, Hangzhou; 311300, China; (2) Key Laboratory of Forestry Intelligent Monitoring and Information Technology of Zhejiang Province, Hangzhou; 311300, China; (3) Key Laboratory of State Forestry and Grassland Administration on Forestry Sensing Technology and Intelligent Equipment, Hangzhou; 311300, China
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 235-242 and 279
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: The automatic classification and recognition of tree image has important practical application value. Relevant research on traditional tree species recognition includes leaf recognition, flower recognition, bark texture recognition, and wood texture recognition. In order to solve the problem of recognizing the tree image with complex background in nature scenes, a tree species recognition method based on the overall tree image and ensemble of transfer learning was proposed. Four pre-training models of AlexNet, VggNet-16, Inception-V3 and ResNet-50 were firstly used on ImageNet large-scale datasets to extract features. They were then transferred to the target tree dataset to train four different classifiers. An ensemble model was finally established by the relative majority voting method and the weighted average method. A new tree image dataset called TreesNet was built and experiments were designed based on the dataset, including the comparative experiments of transfer learning and conventional methods.The experimental results showed that data augmentation can effectively solve the over-fitting problem and the training model had better generalization ability and higher recognition rate. The image recognition accuracy of the tree species in the complex background with the method proposed reached 99.15%, which had a better effect on overall tree image recognition compared with the conventional classification methods of K-nearest neighbor (KNN), support vector machine (SVM) and back propagation neural network (BP). ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 22
Main heading: Forestry
Controlled terms: Backpropagation? - ?Classification (of information)? - ?Complex networks? - ?Deep learning? - ?Image recognition? - ?Large dataset? - ?Nearest neighbor search? - ?Neural networks? - ?Support vector machines? - ?Textures
Uncontrolled terms: Automatic classification? - ?Back propagation neural networks? - ?Comparative experiments? - ?Conventional classification methods? - ?Ensemble learning? - ?K nearest neighbor (KNN)? - ?Transfer learning? - ?Tree species
Classification code: 716.1 Information Theory and Signal Processing? - ?722 Computer Systems and Equipment? - ?723 Computer Software, Data Handling and Applications? - ?723.4 Artificial Intelligence? - ?921.5 Optimization Techniques
DOI: 10.6041/j.issn.1000-1298.2019.08.025
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
20. Design and Experiment of Separating and Cleaning Machine for Flax Threshing Material
Accession number: 20194207539261
Title of translation:
Authors: Dai, Fei (1); Zhao, Wuyun (1); Liu, Guochun (2); Zhang, Shilin (1); Shi, Ruijie (1); Wei, Bo (2)
Author affiliation: (1) College of Mechanical and Electrical Engineering, Gansu Agricultural University, Lanzhou; 730070, China; (2) Gansu OK Agricultural Products Drying Equipment Engineering Research Institute Co., Ltd., Lanzhou; 730010, China
Corresponding author: Zhao, Wuyun(zhaowy@gsau.edu.cn)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 140-147
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: Flax is one of the important oil crops in northwest China, and Gansu Province is one of the main producing areas of flax. To enhance the mechanization level of separating and cleaning of flax threshing materials, based on the study of the flow characteristics (accumulation angle and slip angle with steel of material) and separation-cleaning technological process of flax threshing materials, a separating and cleaning machine for flax threshing material was designed. Through designing and selecting of key operating components of the prototype, the important working parameters of the vibration feeding system, grain separation device, suction fan and cyclone separator were determined. The operation process of automatic discharging discarded device was analyzed and the necessary work conditions to ensure automatic discharge were obtained. For the relevant work performance test of prototype, when the electromagnetic exciter amplitude of the vibration feeding system was controlled at 14~18 mm, and the conversion frequency of the suction fan of the air cleaning system was controlled at 50~60 Hz, the operating machine had a strong adaptability to flax threshing material. After the operation of separating and cleaning machine for flax threshing materials, the cleaning rate of grains was 92.66%, the total entrained loss rate of was 1.58%, there was no obvious blockage in the automatic discharging discarded device and the experimental results met the design requirements of operation machine. The research results can provide an important reference for small grain crop threshing material separating and cleaning equipment development. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 23
Main heading: Cleaning
Controlled terms: Air cleaners? - ?Crops? - ?Fans? - ?Flax? - ?Linen? - ?Materials handling equipment
Uncontrolled terms: Air cleaning systems? - ?Cleaning equipments? - ?Cleaning machine? - ?Conversion frequencies? - ?Flow charac-teristics? - ?Operating components? - ?Technological process? - ?Working parameters
Classification code: 451.2 Air Pollution Control? - ?618.3 Blowers and Fans? - ?691.1 Materials Handling Equipment? - ?802.3 Chemical Operations? - ?819.1 Natural Fibers? - ?819.5 Textile Products and Processing? - ?821.4 Agricultural Products
DOI: 10.6041/j.issn.1000-1298.2019.08.016
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
21. Identification of Territory Space Pattern and Spatio-temporal Evolution Analysis of Urban Agglomeration in Central Yunnan
Accession number: 20194207539308
Title of translation:
Authors: Lin, Yilin (1); Zhao, Junsan (1); Zhang, Meng (1); Chen, Guoping (2)
Author affiliation: (1) Faculty of Land Resource Engineering, Kunming University of Science and Technology, Kunming; 650093, China; (2) Geomatics Engineering Faculty, Kunming Metallurgy College, Kunming; 650033, China
Corresponding author: Zhao, Junsan(junsanzhao@netease.com)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 176-191
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: Carrying out research on regional territory space pattern change, exploring its evolution regularity and differentiation and revealing the coupling mechanism between the quantitative structure and spatial pattern of territory space have guiding significance for promoting the orderly, appropriate and sustainable development and utilization of territory space. Taking the plateau mountainous city-the urban agglomeration in the central Yunnan as an example, and selecting the land use data in 2000, 2005, 2009 and 2015 and DEM data as the basic data source, from the aspects of quantitative structure and spatial layout to analyze the characteristics of territory space pattern change of the urban agglomeration in the central Yunnan at four time points., revealing the spatio-temporal evolution and differentiation of the territory space pattern. The results showed that the topographical features of the plateau mountainous areas affected the distribution of the territory space pattern of the urban agglomerations in central Yunnan, and the vertical differences characteristics were significant. The ecological space was the absolute main body of the territory space type in the urban agglomeration, and the production and living space were mainly distributed in the east of the central part of the study area. In the past 15 years, the spatial change of the production-living-ecological space was accelerated and the regional differences were obvious. The production and living space area were gradually increased, and the ecological space continued to be decreased, showing an overall situation of “break the pale”. The mutual transformation of ecological and production space area constituted the main type of evolution of the territory space pattern. The territory space use degree was increased year by year, and the hotspots of territory space use degree were mainly concentrated in some areas in the central and eastern parts of the study area. At four time points, the territory space pattern in the study area was generally distributed along the northeast-southwest direction. The distribution of production and living space in the northeast was the most concentrated, and the ecological space pattern was more random. The spatial distribution characteristics of kernel density in production and living space were characterized by high density in the central, western and northeastern regions, and low in the south, southwest and northwest, and multi-nuclear diffusion and fragmentation. The spatial distribution characteristics of the calculated values of the kernel density of the ecological space were relatively dense in the east of the central part of the urban agglomeration, and disturbed by human activities, with severe fragmentation and uneven distribution. The development strategy of the western region and the implementation of the corresponding land policy made the territory space structure of the urban agglomerations in central Yunnan a significant change. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 41
Main heading: Agglomeration
Controlled terms: Ecology? - ?Land use? - ?Planning? - ?Spatial distribution
Uncontrolled terms: Geo-info-spectrum? - ?Kernel density? - ?Space patterns? - ?Spatiotemporal evolution? - ?Urban agglomerations
Classification code: 403 Urban and Regional Planning and Development? - ?454.3 Ecology and Ecosystems? - ?802.3 Chemical Operations? - ?912.2 Management? - ?921 Mathematics
DOI: 10.6041/j.issn.1000-1298.2019.08.020
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
22. Optimization and Performance Experiments of Teleoperation System for Tractors
Accession number: 20194207539240
Title of translation:
Authors: Xue, Jinlin (1); Yan, Jia (1); Xia, Chengkai (1); Zou, Jun (1); Yang, Xuebin (1)
Author affiliation: (1) College of Engineering, Nanjing Agricultural University, Nanjing; 210031, China
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 386-393
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: In order to improve the working conditions of drivers, a wireless network based teleoperation system for tractors was designed before, and the feasibility of the system was verified through several experiments. The system was optimized in two ways to further enhance the usability of the system. First of all, a multithreading programming, including a data reading thread and a data processing thread was used to replace single threading programming in the first generation teleoperation system under unchanged hardware conditions, because the first system based on single threading programming had relatively slow response, which cannot fully meet the real-time requirements. Then, a new user interface with a steering wheel manipulator was designed to provide operators more realistic driving experiences, because the first user interface used many buttons to manipulate, which made operation inconvenient and misoperation sometimes. Finally, tests were carried out to detect performances of the optimized system. Results showed that control commands were executed with a delay of no more than 60 ms and the maximum absolute error was no more than 105.3 mm when the tractor was driven along a straight line at speed of 3.17 km/h by the optimized system, with maximum RMS error of 60.1 mm. Compared with the first generation teleoperation system, the precision of right angle turn was improved obviously for the optimized system. When the slalom test was carried out on the teleoperated tractor, there was little difference whether the driver operated in the tractor or operated remotely. Overall, the optimized system provided better remote driving experiences for operators. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 20
Main heading: User interfaces
Controlled terms: Automobile steering equipment? - ?Automobile testing? - ?Data handling? - ?Manipulators? - ?Remote control? - ?Testing? - ?Tractors (agricultural)? - ?Tractors (truck)? - ?Wheels
Uncontrolled terms: Driving experiences? - ?Maximum absolute error? - ?Multi-threading techniques? - ?Optimization and performance? - ?Optimized system? - ?Real time requirement? - ?Steering wheel? - ?Teleoperation systems
Classification code: 601.2 Machine Components? - ?662 Automobiles and Smaller Vehicles? - ?662.4 Automobile and Smaller Vehicle Components? - ?663.1 Heavy Duty Motor Vehicles? - ?722.2 Computer Peripheral Equipment? - ?723.2 Data Processing and Image Processing? - ?731.1 Control Systems
DOI: 10.6041/j.issn.1000-1298.2019.08.043
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
23. Identification and Reconstruction of Citrus Branches under Complex Background Based on Mask R-CNN
Accession number: 20194207539163
Title of translation: Mask R-CNN
Authors: Yang, Changhui (1, 2); Wang, Zhuo (1); Xiong, Longye (1); Liu, Yanping (1); Kang, Xilong (1); Zhao, Wanhua (2)
Author affiliation: (1) College of Mechanical Engineering, Chongqing University of Technology, Chongqing; 400054, China; (2) College of Mechanical Engineering, Xi’an Jiao Tong University, Xi’an; 710049, China
Corresponding author: Zhao, Wanhua(whzhao@mail.xjtu.edu.cn)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 22-30 and 69
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: In the process of citrus harvesting, it is necessary to obtain information about branches and trunks of fruit trees for obstacle avoidance. In natural environment, problems such as random growth posture, different shapes and blocked branches and trunks often arise. In order to complete the acquisition of complete information of branches, the small area recognition of citrus fruit branches was completed by grid marking. The precision rate of the training model under the test set was 98.15% and the average recall rate was 81.09%, and the marker formula could still achieve better recognition results. Because the identified small areas were discrete and discontinuous, it was necessary to divide and sort the discrete areas in order to reconstruct the branches and trunks of citrus trees. At the same time, in order to solve the problems of too many background areas in Mask R-CNN model recognition frame and the recognition frame can not rotate with the growth of branches, the discrete mask obtained from Mask R-CNN model was processed with minimum external moment, and the rectangular border with minimum external moment was used to replace the recognition frame of the original model. Secondly, through the statistical analysis of the position information such as angle and distance between the centerlines of adjacent recognition frames after processing, it was found that there were constraints on the parameters such as angle and distance between centerlines. Therefore, it was proposed to use multi-parameter variable constraints to complete the division of identical recognition frames, in order to reconstruct the branches more in line with the actual growth posture of the branches and improve the ignorance. In the detection of different regions, the center point of the identical trunk recognition frame was fitted by quadratic polynomial, and the fitting error was 11.47%. Finally, the experimental results showed that the citrus tree branch reconstruction accuracy rate was 88.64%. This method can provide a basis for the robot to avoid obstacles safely. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 31
Main heading: Citrus fruits
Controlled terms: Forestry? - ?Orchards
Uncontrolled terms: 2D reconstruction? - ?Citrus? - ?Complete information? - ?Natural environments? - ?Picking robot? - ?Position information? - ?Quadratic polynomial? - ?Recognition
Classification code: 821.3 Agricultural Methods? - ?821.4 Agricultural Products
DOI: 10.6041/j.issn.1000-1298.2019.08.003
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
24. Surface Optimization of Ship Type Ditching System Based on Differential Geometry and EDEM Simulation
Accession number: 20194207539216
Title of translation: EDEM
Authors: Liu, Xiaopeng (1, 2); Zhang, Qingsong (3, 4); Liu, Lichao (3, 4); Wei, Guoliang (3, 4); Xiao, Wenli (3, 4); Liao, Qingxi (3, 4)
Author affiliation: (1) College of Animal Science and Nutritional Engineering, Wuhan Polytechnic University, Wuhan; 430023, China; (2) Grain and Oil Machinery Engineering Technology Research Center of Hubei Province, Wuhan Polytechnic University, Wuhan; 430023, China; (3) College of Engineering, Huazhong Agricultural University, Wuhan; 430070, China; (4) Key Laboratory of Agricultural Equipment in Mid-lower Yangtze River, Ministry of Agriculture and Rural Affairs, Wuhan; 430070, China
Corresponding author: Liao, Qingxi(liaoqx@mail.hzau.edu.cn)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 59-69
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: Considering the soil in Mid-lower Yangtze River is sticky and its moisture content fluctuates greatly, the furrow should be ditched while rapeseed planting. Due to the lack of theoretical basis for the design of resistance reduction of plow surface, the research on soil contract surface optimization of ship type ditching system was carried out by using the method of differential geometry analysis and EDEM simulation. According to the traction resistance analysis and surface parameter analysis of the main contact surface (front plow surface, shaping surface), the main structural parameters range of the contact surface was determined. Based on the theory of differential geometry, the differential geometric expression which can quantitatively describe the spatial shape change of plow surface with straight, parabolic and exponential curves was established. The simulation results of traction resistance characteristics indicated that the parabolic type plows had better resistance reduction characteristics when the operating velocity was 0.9~1.5 m/s. And its resistance were reduced by 15.09%, 16.92% and 32.59%, 31.58% respectively compared with the linear type plows and exponential type plows. The intrinsic geometric parameters E, L and M can respectively reflect the growth rate of traction resistance with speed, the magnitude of traction resistance, and the fluctuation degree of traction resistance with speed. The parameter optimization results indicated that when the operating velocity was 1.2 m/s, the width of ditching plow w was 92 mm and maximum element angle Φmax was 66°, the minimum traction resistance was 1 042.52 N. Field experiment indicated that the average traction resistance of the combined ship-type ditching system optimized by parameters were 956.77 N, 1 101.33 N and 1 564.85 N, and the error between the system and the simulation test results was less than 7%, and the operation effect met the agronomic requirements of rapeseed planting. The research conclusion had great theoretical value and practical significance to the resistance reduction design of plow which formed by horizontal straight line principle. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 27
Main heading: Geometry
Controlled terms: Agricultural machinery? - ?Oilseeds? - ?Shape optimization? - ?Ships? - ?Soils? - ?Structural optimization
Uncontrolled terms: Contact surface? - ?Differential geometry? - ?Ditching device? - ?Geometric quantities? - ?Lower yangtze rivers? - ?Parameter optimization? - ?Resistance reduction? - ?Surface optimization
Classification code: 483.1 Soils and Soil Mechanics? - ?821.1 Agricultural Machinery and Equipment? - ?821.4 Agricultural Products? - ?921 Mathematics? - ?921.5 Optimization Techniques
DOI: 10.6041/j.issn.1000-1298.2019.08.007
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
25. Spatial Structure and Characteristics of Potential Ecological Networks
Accession number: 20194207539229
Title of translation:
Authors: Niu, Teng (1); Yue, Depeng (1); Zhang, Qibin (1); Yu, Qiang (1); Yu, Jiaxin (2); Su, Kai (1)
Author affiliation: (1) Beijing Key Laboratory of Precision Forestry, Beijing Forestry University, Beijing; 100083, China; (2) College of Forestry, Beijing Forestry University, Beijing; 100083, China
Corresponding author: Yue, Depeng(yuedepeng@126.com)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 166-175
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: Taking the Inner Mongolia Desert Oasis as a research area, the analogy analysis of complex networks and potential ecological networks was carried out to study the characteristics of ecosystem energy flow and analyze the connectivity, integrity and stability of potential ecological networks. Combined with the corresponding ecological factors, the ecological resistance surface was constructed, and 1 103 potential ecological corridors and 992 ecological nodes were extracted. The potential ecological network distribution was consistent with the power law distribution, so the weighted network can be adapted to the potential ecological network for analysis. The potential ecological network connectivity in the desert oasis area was poor, the clustering characteristics were not obvious; the ecological nodes were scattered and fragmented, and the integrity was low; the energy flow inside the potential ecological network was relatively simple and not stable enough. The ecological landscape in the desert oasis area was fragmented, and the contradiction between development and ecological protection was more prominent. The overall ecological environment needed to be optimized. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 25
Main heading: Ecology
Controlled terms: Complex networks? - ?Landforms
Uncontrolled terms: Ecological environments? - ?Ecological factors? - ?Ecological networks? - ?Ecological node? - ?Ecological protection? - ?Energy flow? - ?Potential ecological corridor? - ?Power law distribution
Classification code: 454.3 Ecology and Ecosystems? - ?481.1 Geology? - ?722 Computer Systems and Equipment
DOI: 10.6041/j.issn.1000-1298.2019.08.019
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
26. Analysis of Data Quality Evaluation and Optimization in IoT in Cold Chain
Accession number: 20194207539129
Title of translation:
Authors: Hu, Jinyou (1); Wang, Jingjie (1); Zhu, Zhiqiang (2); Zhang, Xiaoshuan (1, 3)
Author affiliation: (1) College of Engineering, China Agricultural University, Beijing; 100083, China; (2) Key Laboratory of Agro-products Storage, Ministry of Agriculture and Rural Affairs, National Engineering and Technology Research Center for Preservation of Agricultural Products, Tianjin; 300384, China; (3) Beijing Laboratory of Food Quality and Safety, China Agricultural University, Beijing; 100083, China
Corresponding author: Zhang, Xiaoshuan(zxshuan@cau.edu.cn)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 1-14
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: Internet of Things (IoT) has become the essential technology, which supports the safety, innovation and sustainable development of cold chain monitoring services. Since the complex technical structure and diverse data formats, there are still many challenges in current application scenarios in the cold chain monitoring services based Internet of things. From the perspective of data, the data quality problem in the monitoring process in cold chain was comprehensively analyzed and examined, in order to enhance the data awareness in the cold chain monitoring applications and its services. And thus inspire the relevant scholars to solve the data quality and optimization issues in clod chain monitoring based IoT. In light of the data quality generation mechanism, data quality assessment methods and application improvement practices, the current research status and the development trends were summarized in line with the life cycle of monitoring data in cold chain. The research and analysis indicated that the measurement and evaluation of data quality became the key to the ongoing improvement of the data quality in IoT in cold chain, which emphasized that the data quality should be handled in the process of where the data generation from the perspective of data quality. It also pointed out that the combination of assessment methods, application scenarios, and requirements differentiation was increasingly tight. And the future research should enhance the process of data retrieval through integrating data characteristics of monitoring technologies and the generation process in cold chain, and cold chain monitoring data quality should enhance the collaboration and mining of monitoring technical characteristics and their performances. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 121
Main heading: Internet of things
Controlled terms: Data reduction? - ?Life cycle? - ?Monitoring? - ?Quality control
Uncontrolled terms: Cold chain? - ?Current research status? - ?Data life cycle? - ?Data quality? - ?Data quality assessment? - ?Internet of Things (IOT)? - ?Monitoring applications? - ?Optimization method
Classification code: 723 Computer Software, Data Handling and Applications? - ?723.2 Data Processing and Image Processing? - ?913.3 Quality Assurance and Control
DOI: 10.6041/j.issn.1000-1298.2019.08.001
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
27. Effects of Applying Biochar on Soil Structure and Soybean Yield on Slope Farmland in Black Soil Region
Accession number: 20194207539237
Title of translation:
Authors: Wei, Yongxia (1, 2); Shi, Guoxin (1); Feng, Chao (1); Wu, Yu (3, 4); Liu, Hui (2, 5)
Author affiliation: (1) School of Water Conservancy and Civil Engineering, Northeast Agricultural University, Harbin; 150030, China; (2) Key Laboratory of High Efficiency Utilization of Agricultural Water Resources, Ministry of Agriculture and Rural Affairs, Northeast Agricultural University, Harbin; 150030, China; (3) Heilongjiang Agricultural Reclamation Survey and Research Institute, Harbin; 150090, China; (4) College of Forestry, Northeast Forestry University, Harbin; 150040, China; (5) School of Science, Northeast Agricultural University, Harbin; 150030, China
Corresponding author: Liu, Hui(xiaolaida@163.com)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 309-320
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: In order to find out the effects of applying biochar on soil structure, soil fertility and crop yield and its sustainability in the black soil region, the field runoff plot of 3° sloping farmland in the black soil region of Northeast China was taken as the research object, and a four-year observation was carried out. In 2015, according to the amount of biochar applied, five treatments of C0 (0 t/hm2), C25 (25 t/hm2), C50 (50 t/hm2), C75 (75 t/hm2), and C100 (100 t/hm2) were set. The treatments were applied as the same amount of biochar in 2016, 2017 and 2018. The results showed that the soil bulk density was decreased gradually with the increase of biochar application and the porosity was increased gradually, and the longer the application period was, the more obvious the effect was. The generalized soil structure coefficient (GSSI) of the four consecutive years was increased first and then decreased with the increase of biochar loading, the soil three-phase structure distance index (STPSD) was decreased first and then increased, and the maximum (minimum) value (98.31, 4.87) was obtained in the second year of C50 treatment. At the same time, the three-phase ratio of soil was the closest to the ideal state. the contents of macro-aggregates (R0.25), mean weight diameter (MWD) and geometric mean diameter (GMD) for four consecutive years were increased first and then decreased with the increase of biochar loading. The decreasing trend was the maximum in the C50 treatment in the second year. The soil available potassium and organic matter were increased gradually with the increase of biochar application for four consecutive years, and the soil available nitrogen and available phosphorus were increased first and then decreased. The highest increase of soil available nitrogen and available phosphorus in each year were C50 (46.1%, 76.6%), C50 (46.4%, 85.4%), C25 (33%, 100.7%) and C25 (23.9%, 103.2%). The application of biochar for four consecutive years can increase the yield of soybean and its components. In the second year, the C50 treatment increased the maximum yield, the yield was increased by 33.3%, and the yield was the most sustainable. The sustainability yield index (SYI) was 0.871. The research results can provide theoretical support for actual production. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 37
Main heading: Soils
Controlled terms: Farms? - ?Nitrogen? - ?Phase structure? - ?Phosphorus? - ?Sustainable development
Uncontrolled terms: Available phosphorus? - ?Available potassiums? - ?Bio chars? - ?Black soil region of northeast chinas? - ?Black soil regions? - ?Geometric mean diameters? - ?Mean weight diameter? - ?Soil structure
Classification code: 483.1 Soils and Soil Mechanics? - ?804 Chemical Products Generally? - ?821 Agricultural Equipment and Methods; Vegetation and Pest Control? - ?933 Solid State Physics
DOI: 10.6041/j.issn.1000-1298.2019.08.034
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
28. Temporal and Spatial Evolution of Landscape Pattern in Baotou City
Accession number: 20194207539107
Title of translation:
Authors: Wang, Ge (1); Yu, Qiang (1); Liu, Xiaoxi (2); Yang, Lan (1); Liu, Jianhua (1); Yue, Depeng (1)
Author affiliation: (1) Beijing Key Laboratory of Precision Forestry, Beijing Forestry University, Beijing; 100083, China; (2) School of Foreign Languages, Beijing Forestry University, Beijing; 100083, China
Corresponding author: Yue, Depeng(yuedepeng@126.com)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 192-199
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: Taking Baotou City of Inner Mongolia as a research area, the remote sensing images of the same month in 2006, 2010 and 2016 were selected. Combined with the land use data of Baotou City, the landscape types of Baotou City were divided into six categories, namely, forest land, grassland, water body, cultivated land, construction land and unused land. And the analysis of landscape pattern dynamics change, transfer network, landscape change spatial aggregation characteristics, center of gravity transfer, landscape pattern index change and landscape pattern evolution driving force were analyzed. The results showed that the characteristics of the urban landscape had undergone profound changes during the decade of 2006-2016. In 2006-2010, the rate of reduction of unused land was as high as 19.48%, and the growth rate of construction land for ten years was increased from 1.3% to 2.76%. In 2010-2016, totally 15.19% of the cultivated land was converted into grassland landscape, and 3.79% was converted into construction land. In the past ten years, landscape changes were distributed in Baotou City. The landscape changes were mainly distributed in the agricultural farming areas where the cultivated land was densely covered with grassland and the interlaced edges of different landscapes. In 2006-2010, in the unutilized land, the bare land in the north was ecologically treated, the area was reduced, and the center of gravity was moved 73.79 km to the southeast. The landscape segmentation index, the aroma diversity, the fragrance uniformity, etc. were decreased, and the dominant landscape was not yet formed, and the landscape fragmentation was intensified. Through the analysis of landscape pattern driving force, it was found that the intensity of landscape change was related to NDVI. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 25
Main heading: Land use
Controlled terms: Geomorphology? - ?Remote sensing
Uncontrolled terms: Baotou City? - ?Center of gravity? - ?Driving forces? - ?Landscape index? - ?Landscape pattern
Classification code: 403 Urban and Regional Planning and Development? - ?481.1.1 Geomorphology
DOI: 10.6041/j.issn.1000-1298.2019.08.021
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
29. Effect of Water Nitrogen Dosage on Nitrogen Absorption and Transformation of Maize under Sprinkler Irrigation Condition
Accession number: 20194207539199
Title of translation:
Authors: Zhang, Zhongxue (1, 2); Liu, Ming (1, 2); Qi, Zhijuan (1, 2)
Author affiliation: (1) School of Water Conservancy and Civil Engineering, Northeast Agricultural University, Harbin; 150030, China; (2) Key Laboratory of High Effective Utilization of Agricultural Water Resources, Ministry of Agriculture and Rural Affairs, Northeast Agricultural University, Harbin; 150030, China
Corresponding author: Qi, Zhijuan(zhijuanqi@neau.edu.cn)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 299-308
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: Aiming to reveal the response of nitrogen uptake and transformation under different water and nitrogen conditions at pre- and post-flower, meanwhile to investigate the relationship between crop nitrogen, fertilizer nitrogen, soil nitrogen and dry matter absorption and transport. Based on the 15N isotope tracing technique, the experiment with three irrigation levels (W1:40 mm, W2:60 mm, W3:80 mm) and four nitrogen levels (N0:0 kg/hm2, N1:180 kg/hm2, N2:240 kg/hm2, and N3:300 kg/hm2) were carried out in field conditions. The results showed that the nitrogen fertilizer recovery rate was 21.27%~44.64%, and the best value was obtained in N2W2 plot. If making a comparison of nitrogen accumulation in each organ at maturity stage, the best was in grain, then was in leaf, stem, and the last was in ear leaf. With moderate nitrogen application regime, the nitrogen accumulation in plants was the highest, however, in W1 plot, it was significantly decreased (P15N transformation and soil nitrogen transformation of various organs of maize from the largest to the smallest was leaf, stem, and stem leaves. Totally 22.43% ~ 39.45% of nitrogen transformation in plant came from fertilizers, the moderate water and nitrogen treatment could keep higher soil nitrogen transformation. The order of contribution rate of nitrogen grain in different organs from the largest to the smallest as leaf, stem and ear leaf. Nitrogen transformation in various organ accounted for 18.29%~44.29% of the nitrogen accumulation in the grain, and the N2W2 plot had the best value. Dry matter transformation and grain contribution rate from the largest to the smallest isstem, leaf and spike leaf, and the greatest value was got in N2W2 treatment. Therefore, a clear conclusion was that the irrigation of 60 mm and nitrogen application of 240 kg/hm2 were the best. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 23
Main heading: Nitrogen fertilizers
Controlled terms: Grain (agricultural product)? - ?Isotopes? - ?Plants (botany)? - ?Soils? - ?Sprinkler systems (irrigation)? - ?Water absorption? - ?Water treatment
Uncontrolled terms: Isotope-tracer techniques? - ?Maize? - ?Nitrogen management? - ?Nitrogen recovery? - ?Nitrogen transformations
Classification code: 445.1 Water Treatment Techniques? - ?483.1 Soils and Soil Mechanics? - ?802.3 Chemical Operations? - ?804 Chemical Products Generally? - ?821.1 Agricultural Machinery and Equipment? - ?821.4 Agricultural Products
DOI: 10.6041/j.issn.1000-1298.2019.08.033
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
30. Analysis of DOF and Kinematic Characteristics of Hexahedral Deployable Mechanism
Accession number: 20194207539185
Title of translation:
Authors: Liu, Wenlan (1); Ma, Pengfei (1); Min, Wei (1); Xu, Yundou (2); Guo, Jinwei (2); Zhao, Yongsheng (2)
Author affiliation: (1) College of Energy and Power Engineering, Lanzhou University of Technology, Lanzhou; 730050, China; (2) Parallel Robot and Mechatronic System Laboratory of Hebei Province, Yanshan University, Qinhuangdao; 066004, China
Corresponding author: Zhao, Yongsheng(yszhao@ysu.edu.cn)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 410-417
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: The theory of degree of freedom (DOF) analysis for multi-loop coupling mechanisms is not yet mature at present. Aiming at the DOF analysis of a spatial multi-loop coupling hexahedron deployable mechanism, a method was presented based on the idea of selecting a hypothetical moving platform, establishing the equivalent series supporting limbs, constructing the equivalent parallel mechanism (PM), and then analyzing the DOF of the equivalent PM to obtain the original hexahedron mechanism. One of kinematic chains composed of more than one link was selected as the moving platform at first, and all kinematic equivalent series supporting limbs of the moving platform were established based on the screw theory. Then the number of links contained in the moving platform was reduced continuously, and the equivalent series limbs were re-established. The original hexahedron mechanism was eventually equivalent to a traditional PM whose moving platform consisted of just one link. The number and properties of the DOF of the multi-loop coupling hexahedron mechanism were obtained by analyzing its equivalent PM. The coupling degree of the hexahedron mechanism was reduced by the proposed method, so that the difficulty of DOF analysis of the original multi-loop coupling mechanism was reduced. In addition, the simulation model of the hexahedral mechanism was built, and the kinematic characteristics of the mechanism were studied by giving different actuations. Furthermore, the folding performance of the mechanism was discussed. The research results of DOF and kinematic characteristics laid a foundation for the force analysis of the hexahedron mechanism, and the proposed method provided a way for the DOF analysis of other types of polyhedron mechanisms. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 27
Main heading: Kinematics
Controlled terms: Degrees of freedom (mechanics)? - ?Mechanisms? - ?Screws
Uncontrolled terms: Coupling mechanism? - ?Degree of freedom? - ?Degree of freedom (dof)? - ?Deployable mechanisms? - ?Folding ratio? - ?Kinematic characteristics? - ?Parallel mechanisms? - ?Screw theory
Classification code: 601.3 Mechanisms? - ?605 Small Tools and Hardware? - ?931.1 Mechanics
DOI: 10.6041/j.issn.1000-1298.2019.08.046
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
31. Humification Process of Biogas Residue Combined with Food Waste and Cattle Manure Co-composting
Accession number: 20194207539089
Title of translation: ,
Authors: Bai, Ling (1, 2); Li, Qian (1, 2); Deng, Yun (1, 2); Huang, Zhenxing (1, 2); Xie, Lijuan (1, 2); Ruan, Wenquan (1, 2)
Author affiliation: (1) School of Environment and Civil Engineering, Jiangnan University, Wuxi; 214122, China; (2) Jiangsu Key Laboratory of Anaerobic Biotechnology, Wuxi; 214122, China
Corresponding author: Ruan, Wenquan(wqruanjn@gmail.com)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 331-338
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: Sludge residue (SLR), straw residue (STR) and vinegar residue (VR) combined with food waste and cattle manure were used as composting substance, respectively. The dynamics of enzymatic activity during composting, including dehydrogenase, urease, polyphenol oxidase and cellulase activity, and the change of humic acid composition (HA, FA) before and after composting were monitored and analyzed. The results showed that the activities of dehydrogenase and urease in the composting process of STR were increased first and then decreased with composting, and the polyphenol oxidase and cellulase activity were higher, which accelerated the decomposition and humification of organic matter. Compared with STR and VR, the dehydrogenase and urease activities of SLR remained high at the end of composting, which were 19.25 μg/(g?h) and 6.22 mg/(g?d), respectively, indicating that there was some unstable organic matter. After 30 days of composting, STR presented the highest degree of humification in compost, humification ratio (HR), humification index (HI), degree of polymerization (DP) and percentage of HA (PHA) was 28.89%, 19.24%, 1.99 and 66.60%, respectively. The molecular weights of humic acid were changed from 2 024 Da, 3 284 Da and 2 090 Da before composting to 2 061 Da, 3 929 Da and 3 990 Da after composting. Compost was used for different purposes depending on the molecular weight of humic acid. Therefore, based on multivariate parameter characterization of different residues, it provided a theoretical basis for efficient resource utilization of biogas residue and its product application. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 31
Main heading: Waste treatment
Controlled terms: Biodegradation? - ?Biogas? - ?Biogeochemistry? - ?Composting? - ?Enzyme activity? - ?Fertilizers? - ?Manures? - ?Molecular weight? - ?Organic acids? - ?Soils
Uncontrolled terms: Biogas residues? - ?Degree of polymerization? - ?Enzymatic activities? - ?Humification? - ?Humification process? - ?Parameter characterization? - ?Product applications? - ?Resource utilizations
Classification code: 452.4 Industrial Wastes Treatment and Disposal? - ?461.8 Biotechnology? - ?461.9 Biology? - ?481.2 Geochemistry? - ?483.1 Soils and Soil Mechanics? - ?804 Chemical Products Generally? - ?804.1 Organic Compounds? - ?821.5 Agricultural Wastes? - ?931.3 Atomic and Molecular Physics
DOI: 10.6041/j.issn.1000-1298.2019.08.036
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
32. Effect of Straw Returning with Nitrogen Application on Soil Properties and Water Use Efficiency
Accession number: 20194207539284
Title of translation:
Authors: Li, Rong (1); Hou, Xianqing (1); Wu, Pengnian (1); Li, Peifu (1); Wang, Xi’na (1)
Author affiliation: (1) School of Agriculture, Ningxia University, Yinchuan; 750021, China
Corresponding author: Hou, Xianqing(houxianqing1981@126.com)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 289-298
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: In order to define the effect of straw returning with nitrogen application on soil properties and water use efficiency of maize in Yanghuang Irrigation Area of Ningxia, the treatment with uncovered straw and nitrogen application rate of 333 kg/hm2 was taken as the control (CK), the effects of different nitrogen application rates of SR+N0 (0 kg/hm2), SR+N1 (150 kg/hm2), SR+N2 (300 kg/hm2) and SR+N3 (450 kg/hm2) on soil bulk density, water, nutrient, maize grain yield and water use efficiency were investigated. The results showed that the straw returning with nitrogen application could improve soil bulk density and total porosity in tilth soil (0~40 cm), and the SR+N2 and SR+N3 treatments were the best. The mean tilth soil bulk densities with SR+N2 and SR+N3 were significantly increased by 8.0% and 8.8%, the mean total soil porosities were significantly increased by 11.4% and 12.5%, compared with CK. Straw returning with nitrogen application was useful for increasing soil organic carbon and total nitrogen at 0~40 cm soil layer, and the contents of soil organic carbon, total nitrogen with SR+N2 and SR+N3 were significantly increased, compared with CK. The ration of carbon to nitrogen was decreased with the increase of application rate of nitrogen under the condition of straw returning. The enhancement of soil fertility was the highest at SR+N2, with significant increase of the contents of soil alkeline-N, available P, and available K by 33.6%, 47.0% and 30.8%, respectively. The SR+N2 treatment had better soil moisture conservation effect at middle and later growing stage of maize, and it also achieved the higher maize grain yield and water use efficiency improvement. The two-year mean maize grain yield and water use efficiency with SR+N2 were significantly increased by 33.9% and 26.2%, respectively, compared with CK. Through the two-year results it was found that straw returning with application of nitrogen can not only effectively improve soil physical properties, but also significantly increase the soil nutrient contents, regulate the ration of carbon to nitrogen, and showed the better soil water conservation ability, therefore significantly increased crop yield and water use efficiency in Yanghuang Irrigation Area of Ningxia. The straw returning with application of pure nitrogen for 300 kg/hm2 was the best. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 42
Main heading: Soil conservation
Controlled terms: Efficiency? - ?Forestry? - ?Irrigation? - ?Moisture control? - ?Nitrogen fertilizers? - ?Nutrients? - ?Organic carbon? - ?Porosity? - ?Soil moisture? - ?Water conservation
Uncontrolled terms: Moisture conservation? - ?Nitrogen application rates? - ?Soil bulk density? - ?Soil nutrients? - ?Soil physical property? - ?Soil water? - ?Soil-water conservation? - ?Water use efficiency
Classification code: 444 Water Resources? - ?483.1 Soils and Soil Mechanics? - ?731.3 Specific Variables Control? - ?804 Chemical Products Generally? - ?804.1 Organic Compounds? - ?821.3 Agricultural Methods? - ?913.1 Production Engineering? - ?931.2 Physical Properties of Gases, Liquids and Solids
DOI: 10.6041/j.issn.1000-1298.2019.08.032
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
33. Design and Analysis of Moving Mechanism of Shape Reconfigurable Mobile Robot
Accession number: 20194207539226
Title of translation:
Authors: Zhang, Shuo (1); Yao, Jiantao (1, 2); Xu, Yundou (1, 2); Zhu, Haixiao (1); Han, Bo (1); Zhao, Yongsheng (1, 2)
Author affiliation: (1) Parallel Robot Mechatronic System Laboratory of Hebei Province, Yanshan University, Qinhuangdao; 066004, China; (2) Key Laboratory of Advanced Forging and Stamping Technology and Science, Ministry of Education, Yanshan University, Qinhuangdao; 066004, China
Corresponding author: Zhao, Yongsheng(yszhao@ysu.edu.cn)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 418-426
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: Based on the idea of using mobile robots instead of farmers to work in the complex environment of farmland and reducing the burden on farmers, a type of reconfigurable mobile robot with wheel/track shape was proposed. Four wheel/track configurations of the same structure were adopted to reconstruct the walking unit and the vehicle body, which had two walking postures, a wheel type and a crawler type, to adapt to the complex terrain in the field. The reconfigurability of the wheel/track motion pattern was achieved by the wheel/track shape conversion device. The mathematical model of the walking unit was derived, and the relationship between angle of swinging rod of robot and height h of step and range of slope that can climb can be obtained when the walking unit robot overcame the obstacle. The virtual prototype and simulation environment of the walking unit were established in Simulink and ADAMS, and the prototype was developed. And calculated by the error formula, the simulated value and the theoretical value of the error were between 10-8 and 10-6. The driving torque error between ADAMS’s simulation and theoretical values was only 1.26×10-5 N?m, which verified the correctness of the mathematical model and obtained the driving torque required by the robot during the wheel-shifting process, and provided a theoretical basis for the subsequent experimental research of this type of robot. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 21
Main heading: Wheels
Controlled terms: Agriculture? - ?Dynamics? - ?Errors? - ?Kinematics? - ?Machine design? - ?Mobile robots? - ?Virtual reality
Uncontrolled terms: Complex environments? - ?Design and analysis? - ?Experimental research? - ?Reconfigurable? - ?Reconfigurable mobile robots? - ?Simulation environment? - ?Simulation verification? - ?Theoretical values
Classification code: 601 Mechanical Design? - ?601.2 Machine Components? - ?723 Computer Software, Data Handling and Applications? - ?731.5 Robotics? - ?821 Agricultural Equipment and Methods; Vegetation and Pest Control? - ?931.1 Mechanics
DOI: 10.6041/j.issn.1000-1298.2019.08.047
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
34. Design and Test of Tillage Depth Monitoring System for Suspended Rotary Tiller
Accession number: 20194207539168
Title of translation:
Authors: Du, Xinwu (1, 2); Yang, Xulong (1); Pang, Jing (1); Ji, Jiangtao (1, 2); Jin, Xin (1, 2); Chen, Lei (1)
Author affiliation: (1) College of Agricultural Equipment Engineering, Henan University of Science and Technology, Luoyang; 471000, China; (2) Advanced Manufacturing of Mechanical Equipment Henan Collaborative Innovation Center, Luoyang; 471000, China
Corresponding author: Ji, Jiangtao(jjt0907@163.com)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 43-51
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: Aiming at the problems of low efficiency of depth measurement and lack of effective online monitoring method in rotary tiller operation, a nonlinear monitoring method of rotary tillage depth based on suspended rotary tillage attitude was developed to improve the automation level of rotary tillage quality monitoring. Firstly, the suspension attitude of rotary tiller was analyzed, and the mathematical relationship between the depth and attitude of rotary tiller was established based on the geometric relationship. After comprehensively considering the influence of the structural deformation and wheel subsidence of the suspended rotary tiller group on the measurement results, a three-calibration parameter tillage depth detection model was established. The model can be used to calculate the tillage depth in real time by fitting the relationship between the attitude angle of rotary tiller and the tillage depth. Secondly, in order to verify the measurement accuracy of the model, a rotary tillage depth monitoring system suitable for vehicle terminal was designed. The system integrated satellite positioning, real-time depth measurement, operation speed measurement, operation area calculation and stability evaluation module, and realized the display of the vehicle terminal and cloud storage. Finally, the model parameters were calibrated in the field and optimized based on Matlab. The results of the calibration test showed that the tillage depth value was decreased gradually with the increase of the horizontal inclination angle of the lower link, and the two were negatively correlated, and the tillage depth value was increased gradually with the increase of the horizontal inclination angle of the frame, and the two were positively correlated. A number of field tests were conducted on the calibrated rotary tillage depth monitoring system, and the results showed that the maximum error was 0.80 cm, and the root-mean-square error was 0.55 cm. When the tillage depth was about 11 cm, the measured value was closer to the real value, which happened to be within the reasonable operating depth range of rotary tillage, indicating that the rotary tillage depth monitoring system had high accuracy and good stability. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 25
Main heading: Monitoring
Controlled terms: Agriculture? - ?Calibration? - ?Distributed computer systems? - ?Mean square error? - ?System stability
Uncontrolled terms: Calibration parameters? - ?Geometric relationships? - ?Mathematical relationship? - ?On-line monitoring methods? - ?Root mean square errors? - ?Rotary tiller? - ?Tillage depth? - ?Working quality
Classification code: 722.4 Digital Computers and Systems? - ?821 Agricultural Equipment and Methods; Vegetation and Pest Control? - ?922.2 Mathematical Statistics? - ?961 Systems Science
DOI: 10.6041/j.issn.1000-1298.2019.08.005
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
35. Nondestructive Diagnostics of Nitrogen and Potassium Deficiencies Based on Chlorophyll Distribution Features of Cucumber Leaves
Accession number: 20194207539330
Title of translation:
Authors: Shi, Jiyong (1); Li, Wenting (1); Guo, Zhiming (1); Huang, Xiaowei (1); Li, Zhihua (1); Zou, Xiaobo (1)
Author affiliation: (1) School of Food and Biological Engineering, Jiangsu University, Zhenjiang; 212013, China
Corresponding author: Zou, Xiaobo(zou_xiaobo@ujs.edu.cn)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 264-269
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: The deficiencies of essential macronutrients of nitrogen (N) and potassium (K) usually affect the production of chlorophyll, cause imbalances in plant growth and drastically most importantly affect the quality and yield of agricultural products. A new N/K deficiency diagnostics method was proposed based on chlorophyll distribution features of the whole cucumber leaf. N/K deficient cucumber plants and control plants were grown under non-soil conditions with special nutrient supply. Chlorophyll distribution maps of N deficient leaves, K deficient leaves and control leaves were determined by using hyperspectral imaging technology and genetic algorithm, and distribution features extracted from the chlorophyll distribution maps were employed to diagnose N/K deficiencies. Chlorophyll distribution features (the mean value of all pixels in leaf center region and the number of pixels with low chlorophyll content in the leaf edge region) were extracted. A diagnostic method based on these features were obtained with total diagnostics rates of 95% for N/K deficiencies. The result indicated that the extracted chlorophyll distribution features could be employed to diagnose N and K deficiencies in cucumber plants. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 22
Main heading: Chlorophyll
Controlled terms: Agricultural products? - ?Genetic algorithms? - ?Hyperspectral imaging? - ?Nitrogen? - ?Pixels? - ?Plants (botany)? - ?Potassium? - ?Spectroscopy
Uncontrolled terms: Chlorophyll contents? - ?Chlorophyll distribution? - ?Cucumber leaf? - ?Diagnostic methods? - ?Distribution features? - ?Hyperspectral imaging technologies? - ?Non-destructive diagnostic? - ?Potassium deficiency
Classification code: 549.1 Alkali Metals? - ?804 Chemical Products Generally? - ?804.1 Organic Compounds? - ?821.4 Agricultural Products
DOI: 10.6041/j.issn.1000-1298.2019.08.029
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
36. Optimization Design and Experiment of Walk-type Potted Rice Seedling Transplanting Mechanism on Film Perforating Part
Accession number: 20194207539295
Title of translation:
Authors: Xu, Chunlin (1); Lü, Zhijun (1); Xin, Liang (1); Wang, Jie (1); Zhao, Yun (1)
Author affiliation: (1) College of Engineering, Northeast Agricultural University, Harbin; 150030, China
Corresponding author: Xin, Liang(xinliang@neau.edu.cn)
Source title: Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery
Abbreviated source title: Nongye Jixie Xuebao
Volume: 50
Issue: 8
Issue date: August 25, 2019
Publication year: 2019
Pages: 90-96
Language: Chinese
ISSN: 10001298
CODEN: NUYCA3
Document type: Journal article (JA)
Publisher: Chinese Society of Agricultural Machinery
Abstract: In order to achieve the combination of potted rice seedling transplanting and technology of mulch-film, a kind of walk-type potted rice seedling transplanting mechanism was designed. The process of seedling picking, conveying, film perforating and cooperating transplanting was completed by a set of rotary mechanisms. According to the working principle of the transplanting mechanism, kinematic theory model was set up and digital optimization goals were set. The computer aided analysis and optimization software of the transplanting mechanism based on Visual Basic 6.0 was developed. A set of parameters of the transplanting mechanism which met the requirements of transplanting were obtained by optimization. The two-dimensional structure of the transplanting mechanism was designed. Three-dimensional model was established. The virtual prototype simulation was completed by ADAMS software. The trajectory and attitude verification tests were carried out on the prototype using the test bench and high-speed photography technology. The results of bench test, simulation analysis and theoretical analysis were almost in agreement, which verified the rationality and correctness of the institutional design. The seedling pick-up test, film perforating test and transplanting test were completed on the test bench. The results showed that the success rate of seedlings pick-up was 90.4%. The success rate of transplanting for films of straw fiber and plastic was 87.5% and 82.5%, respectively, the results showed that the length and width of the film holes were good, which could meet the requirements of walk-type potted rice seedling transplanting mechanism on film perforating part. ? 2019, Chinese Society of Agricultural Machinery. All right reserved.
Number of references: 27
Main heading: High speed photography
Controlled terms: Composite structures? - ?Computer aided analysis? - ?Computer software? - ?Perforating? - ?Pickups? - ?Testing? - ?Visual BASIC
Uncontrolled terms: Institutional design? - ?Optimization software? - ?Rice seedlings? - ?Three-dimensional model? - ?Transplanting mechanisms? - ?Two-dimensional structures? - ?Virtual prototype simulation? - ?Walk-type
Classification code: 408.2 Structural Members and Shapes? - ?723 Computer Software, Data Handling and Applications? - ?742.1 Photography
DOI: 10.6041/j.issn.1000-1298.2019.08.010
Compendex references: YES
Database: Compendex
Compilation and indexing terms, Copyright 2019 Elsevier Inc.
Data Provider: Engineering Village
37. Design and Experiment of Separating-guiding Anti-blocking Mechanism for No-tillage Maize Planter
Accession number: 20194207539171
Title of translation:
Authors: Niu, Mengmeng (1); Fang, Huimin (1); Chandio, F.A. (2); Shi, Son