蔡赟,张邦成,姚禹.3PTT-2R串并联数控机床动力学耦合特性研究[J].农业机械学报,2015,46(12):362-369.
Cai Yun,Zhang Bangcheng,Yao Yu.Dynamics Coupling Characteristics of 3PTT-2R NC Serial-parallel Machine Tool[J].Transactions of the Chinese Society for Agricultural Machinery,2015,46(12):362-369.
摘要点击次数: 2564
全文下载次数: 1493
3PTT-2R串并联数控机床动力学耦合特性研究   [下载全文]
Dynamics Coupling Characteristics of 3PTT-2R NC Serial-parallel Machine Tool   [Download Pdf][in English]
投稿时间:2015-04-26  
DOI:10.6041/j.issn.1000-1298.2015.12.049
中文关键词:  串并联机床  奇异约束条件  耦合因素  动力学耦合
基金项目:国家自然科学基金资助项目(61374138)、教育部新世纪人才资助项目(NCET-12-0731)和吉林省教育厅“十二五”科学技术研究资助项目(2012111)
作者单位
蔡赟 长春工业大学
上海交通大学 
张邦成 长春工业大学 
姚禹 长春工业大学 
中文摘要:为较好地保证机床动力学特性和在复杂曲面加工过程中有较好的加工精度,基于机构运动和受力规律,针对设计的3并联2串联混合型数控机床进行动力学耦合问题研究。提出了一种联合应用凯恩方程及拉格朗日方程的动力学解耦方法。建立了机床串联及并联部分完整的动力学耦合模型并确定了耦合因素。进行了复杂曲面零件的动力学耦合仿真,仿真结果表明:建立的动力学耦合模型是正确且可行的,符合运动学及受力规律。进行了复杂曲面零件的切削加工实验,机床运行平稳且速度较快,无较大奇异位置及耦合误差。表面粗糙度结果反映了机床的运动精度,干涉条纹证明了机床受力均匀。实验结果表明理论分析正确,该研究方法和过程不仅能够真实、主动和有效地解决机床动力学耦合问题,而且可为后续机床精确伺服控制提供基础。
Cai Yun  Zhang Bangcheng  Yao Yu
Changchun University of Technology,Changchun University of Technology and Changchun University of Technology
Key Words:Serial-parallel machine tool  Singular constraint  Coupling factors  Dynamics coupling
Abstract:The dynamics coupling problem for the self designed “3 parallels∪2 series” mixed type NC machine tool was studied based on the kinematics and force rule of mechanism in order to ensure that the machine can have good dynamics characteristics and high quality of parts during the process of machining complex surface. A method based on Kane and Lagrange was put forward. A whole dynamics coupling model of serial and parallel mechanism was established and the coupling factors were determined. The process of machining complex part and the force of machine tool were dynamically simulated. The simulation results showed that the established dynamics model was credible and reliable, and in accordance with dynamics rules of the force and kinematics relations. The experiment was made to cut complex surface parts and the machine tool run smoothly with fast speed. There was no large singular position and coupling error. The surface roughness results showed the kinematics accuracy of the machine tool and interference fringe proved the force uniform of machine tool. As there was no singular coupled vibration and collision, it was proved that the theoretical analysis was correct. The method and process can solve dynamics coupling problem actively, real-timely and effectively of 3PTT-2R NC machine tool, and lay a foundation for accurate control of NC machine tools.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器