To increase the energy-efficient performance, a forming machine with geared-roller annular mould was proposed. Based on the analysis of mechanism kinematics, the motions of geared roller and annular mould were non-interference with each other. Compared with normal annular mould, a larger grab angle in the structure was good for enhancing the production efficiency. Particles of locust, of which moisture content were 8%～20%, were taken as raw materials. The experimental results showed that the specific energy consumption was 56.82kW·h/t and the formation density was 1.085g/cm3. Correspondingly, the output was improved by 3.36%～6.25%, the energy consumption was decreased by 5.77% and the density was increased by 3.33%. Meanwhile, the energy consumption was 50.3kW·h/t with the moisture content of 16% and speed of 200r/min.