Adjustability of infeed angle is of great importance to design and use of the whole continuous flat press which is used to produce wood-based panels. Based on the capability of bending deformation of the steel, a method using bending deformation of integral infeed upper hot platen shaped as rectangular in cross section to adjust infeed angle was put forward. On the basis of analyzing curving principle of bending deformation and deducing geometrical relationship between radius of curvature and height of curving, bending strength of infeed upper hot platen was calculated by simulation and a distributed system as well as human-computer interaction control system based on fieldbus was established. Displacement gradient progressive-approximation algorithm used for hydraulic cylinders was set up and the system was applied to continuous flat press designed in China. The results showed that bending deformation of upper hot platen met requirements of bending strength, the method of adjusting infeed angle and the control algorithm could be used to achieve progressivity of displacement changing for hydraulic cylinders and dynamic adjusting of infeed angle, and the control precision could be reached by field debugging. The maximum error was 0.4mm between theoretical and practical value, and maximum horizontal difference was 0.6mm when radius of curvature was 100000mm.