李耀明,王成红,徐立章,李 磊,薛 臻.切纵流联合收获机脱粒分离装置田间试验与参数优化[J].农业机械学报,2014,45(11):111-116.
Li Yaoming,Wang Chenghong,Xu Lizhang,Li Lei,Xue Zhen.Parameter Optimization and Field Test of Threshing and Separation Device in Tangential longitudinal Combine[J].Transactions of the Chinese Society for Agricultural Machinery,2014,45(11):111-116.
摘要点击次数: 3608
全文下载次数: 1627
切纵流联合收获机脱粒分离装置田间试验与参数优化   [下载全文]
Parameter Optimization and Field Test of Threshing and Separation Device in Tangential longitudinal Combine   [Download Pdf][in English]
投稿时间:2013-12-31  
DOI:10.6041/j.issn.1000-1298.2014.11.017
中文关键词:  水稻 脱粒分离装置 纵轴流滚筒 切流滚筒 参数优化 田间试验
基金项目:国家高技术研究发展计划(863计划)资助项目(2012AA10A502)、 中国博士后科学基金资助项目(2011M501181)、江苏省自然科学基金资助项目(BK2011469)、江苏省高校自然科学研究资助项目(11KJA460002)、江苏省农业科技支撑计划资助项目(BE2012382)和江苏高校优势学科建设工程资助项目(苏财教(2011)8号)
作者单位
李耀明 江苏大学 
王成红 江苏大学 
徐立章 江苏大学 
李 磊 江苏大学 
薛 臻 江苏常发锋陵农业装备有限公司 
中文摘要:为了研究切纵流联合收获机脱粒分离装置的最佳结构参数和运动参数,对履带式切纵流联合收获田间试验机进行结构改进、载荷测试系统的构建和水稻田间试验,研究切流滚筒、纵轴流滚筒间隙和切流滚筒、纵轴流滚筒转速对脱粒总功耗、切流滚筒功耗、纵轴流滚筒功耗和夹带损失率等性能的影响。并对总功耗和夹带损失率的数据进行二次多项式回归分析和复合型优化分析得到最佳参数配置:切流滚筒间隙为30.99mm,纵轴流滚筒间隙为14mm,切流滚筒和纵轴流滚筒转速为892.95、848.95r/min。试验表明,该参数组合下,脱粒总功耗39.03kW,切流滚筒功耗11.72kW,纵轴流滚筒功耗27.31kW,夹带损失率0.50%。对切流滚筒和纵轴流滚筒下方脱出混合物分布进行了研究,为清选装置的设计与优化提供了依据。
Li Yaoming  Wang Chenghong  Xu Lizhang  Li Lei  Xue Zhen
Jiangsu University;Jiangsu University;Jiangsu University;Jiangsu University;Jiangsu Changfa-fengling Agricultural Equipment Co., Ltd.
Key Words:Rice Threshing and separation device Axial flow drum Tangential drum Parameter optimization Field test
Abstract:In order to obtain the optimal structure and operational parameters of the threshing and separation device of tangential-longitudinal combine, rice harvest in field was conducted to study influence of tangential drum-concave gap, longitudinal drum-concave gap and speed of tangential drum and longitudinal drum on the performance of total threshing-and-separation power consumption, tangential drum power consumption, longitudinal drum power consumption and entrained loss. The combine was re-constructed- based on self-developed tangential-longitudinal combine and load test system was built for the combine. Optimal parameters are gained by quadric polynomial regress analysis and complex method, and tangential drum-concave gap is 30.99mm, longitudinal drum-concave gap is 14mm and the speed of tangential drum and longitudinal drum is 892.95r/min and 848.95r/min respectively. The test result showed that on the parameter’s condition, total power consumption was 39.03kW, power consumption of tangential drum and longitudinal drum were 11.72kW and 27.31kW respectively and the entrained loss rate was 0.50%. Mixture distribution under tangential drum and longitudinal drum was analyzed, and it provide basis for design and optimization of cleaning unit.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器