黄志东,张 雷,赵 继.双曲面加工干涉区域分析[J].农业机械学报,2014,45(4):322-326.
Huang Zhidong,Zhang Lei,Zhao Ji.Analysis of Interference Area in Machining Hyperboloidal Surface[J].Transactions of the Chinese Society for Agricultural Machinery,2014,45(4):322-326.
摘要点击次数: 2735
全文下载次数: 1366
双曲面加工干涉区域分析   [下载全文]
Analysis of Interference Area in Machining Hyperboloidal Surface   [Download Pdf][in English]
投稿时间:2013-05-11  
DOI:10.6041/j.issn.1000-1298.2014.04.051
中文关键词:  双曲面 加工 干涉 分析
基金项目:国家高技术研究发展计划(863计划)资助项目(2012AA041304)、国家重点基础研究发展计划(973计划)资助项目(2011CB706702)和吉林大学研究生创新基金资助项目(20121078)
作者单位
黄志东 吉林大学
辽宁科技学院 
张 雷 吉林大学 
赵 继 吉林大学 
中文摘要:针对复杂曲面中较为常见的双曲面进行了研究,建立了加工双曲面的数学模型,通过对双曲面参数特征的分析,发现了双曲面上任意点的切线斜率极限值以及刀具轴线斜率极限值的变化规律,据此推导出双曲面参数、刀具参数与偏心率平方之间的函数关系,推演了加工双曲面不发生干涉的参数准则,同时明确了切削角与偏心率平方满足不同函数关系对应的干涉区域。通过仿真实验,验证了理论分析的正确性,为加工双曲面的参数选取提供依据。
Huang Zhidong  Zhang Lei  Zhao Ji
Jilin University;Liaoning Institute of Science and Technology;Jilin University;Jilin University
Key Words:
Abstract:

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器