油菜联合收获机不同脱粒元件对脱离性能的影响试验
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家油菜产业技术体系专项资助项目(CARS-13)、“十一五”国家科技支撑计划资助项目(2010BAD01B06)、中央高校基本科研业务费专项资金资助项目(2011PY021)和华中农业大学自主科技创新基金资助项目(2013SC)


Effect of Different Threshing Elements on Threshing and Separating Performance for Rape Combine Harvester
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用自行研制的纵轴流脱离试验台及切纵轴流联合收获机,对钉齿、钉齿-短纹杆组合、短纹杆、长纹杆4种不同脱粒元件进行了油菜脱离性能对比试验。试验结果表明,短纹杆脱粒元件对应的脱前损失率为4.58%,筛下脱出率为95.38%,其综合脱离性能较优,能有效地减轻清选负荷。

    Abstract:

    The longitudinal axial threshing and separating unit and the tangential longitudinal axial combine harvester were used to conduct comparative experiment on spike tooth, combination of spike tooth and short rasp bar, short rasp bar and long rasp bar. The experimental results showed that the loss ratio before threshing and the threshing rate of short rasp bar were 4.58% and 95.38%, respectively. Comprehensive threshing and separating performance were better than other threshing units and could relieve cleaning load effectively.

    参考文献
    相似文献
    引证文献
引用本文

黄鹏,廖庆喜,宗望远,李海同,李平.油菜联合收获机不同脱粒元件对脱离性能的影响试验[J].农业机械学报,2013,44(Supp2):47-51.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2013-10-21
  • 出版日期: