王文成,刘晓论,孙威,何丽妍,武添松,刘家郡.双节距齿形输送链条设计与试验[J].农业机械学报,2013,44(2):243-247.
Wang Wencheng,Liu Xiaolun,Sun Wei,He Liyan,Wu Tiansong,Liu Jiajun.Design and Experiment of Double-pitch Silent Chain for Conveyors[J].Transactions of the Chinese Society for Agricultural Machinery,2013,44(2):243-247.
摘要点击次数: 4058
全文下载次数: 1994
双节距齿形输送链条设计与试验   [下载全文]
Design and Experiment of Double-pitch Silent Chain for Conveyors   [Download Pdf][in English]
  
DOI:10.6041/j.issn.1000-1298.2013.02.044
中文关键词:  滚动铰链  双节距齿形链  变节距特性  设计  试验
基金项目:国家高技术研究发展计划(863计划)资助项目(2006AA04Z225)
作者单位
王文成 吉林大学 
刘晓论 吉林大学 
孙威 吉林大学 
何丽妍 吉林大学 
武添松 吉林大学 
刘家郡 吉林大学 
中文摘要:研究了齿形链啮合机理和设计方法,提出了一种双节距齿形输送链条。对其结构特性及啮入冲击速度进行了分析,给出了链条主要设计参数及其关系式,并对其进行了200 h的磨损试验,试验结果表明:200 h后,双节距齿形输送链条的磨损伸长率仅为0.149%,明显低于传统的双节距滚子输送链条。验证了双节距齿形输送链设计方法的合理性。
Wang Wencheng  Liu Xiaolun  Sun Wei  He Liyan  Wu Tiansong  Liu Jiajun
Jilin University;Jilin University;Jilin University;Jilin University;Jilin University;Jilin University
Key Words:Rolling joint  Double-pitch silent chain  Pitch changing feature  Design  Experiment
Abstract:A type of double-pitch silent chain for conveyors was proposed. Its structure was designed and the relative parameters and designed formula were given. And wear test for 200 h was done. The results showed that the ratio of wear elongation of double-pitch silent chain for conveyors was 0.149%, which was shorter than the double-pitch roller chain’s, and the design could improve the conveying conditions distinctly. Therefore, the design of double-pitch silent chain for conveyors showed the feasibility of application.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器