槽缝气吸式小麦精量排种器
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

“十二五”国家粮食丰产科技工程资助项目(2011BAD16B08)和河北省科技支撑计划资助项目(11220619)


Slot-type Pneumatic Precise Wheat Seed-metering Device
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    设计了一种槽缝气吸式小麦排种器。通过试验对比分析了梯形、U形、V形以及“1”字缝隙式槽缝结构的排种器吸种均匀性,梯形槽缝式排种器的吸种变异系数最小,为7.0%,排种种子破损率小于0.30%,满足小麦精量播种的要求。但是由于在实际作业时,风机负压的波动,各缝隙处的气流吸力的差异,致使该排种器的各行排种量一致性没有提高,在不同变速情况下各行排种量的变异系数不大于4.4%。

    Abstract:

    A kind of trapezoidal slot-type pneumatic wheat seed-metering device was designed. Through experiments, the sucking seed uniformity of the seed-metering device with trapezoidal, U-shape, V-shape slot-type and the straight slot-type was analyzed. The experimental data showed the variation coefficient of the seed metering device with trapezoidal slot-type was the smallest, which was 7.0%, and the seed breakage rate was lower than 0.30%. These data conformed to the requirement of wheat precise seeding. But in the actual operation because of undulation of negative pressure of the wind machine and difference of air current suction in each row slot-type, the consistency of each line seeding quantity of the seed-metering device was not improved. Its variation coefficient was not more than 4.4% in the different speed change situations. 

    参考文献
    相似文献
    引证文献
引用本文

赵晓顺,于华丽,张晋国,霍晓静,陈凤艳,赵金.槽缝气吸式小麦精量排种器[J].农业机械学报,2013,44(2):48-51,74.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2013-02-04
  • 出版日期: