万鹏,赵伟松,龙超,蹇在庆.甘蔗去皮与切断特性试验[J].农业机械学报,2012,43(Z1):141-145.
Wan Peng,Zhao Weisong,Long Chao,Jian Zaiqing.Experiment of Peeling and Cutting Characteristics for Sugarcane[J].Transactions of the Chinese Society for Agricultural Machinery,2012,43(Z1):141-145.
摘要点击次数: 3487
全文下载次数: 1726
甘蔗去皮与切断特性试验   [下载全文]
Experiment of Peeling and Cutting Characteristics for Sugarcane   [Download Pdf][in English]
  
DOI:10.6041/j.issn.1000-1298.2012.S0.028
中文关键词:  甘蔗  去皮  切断  机械特性
基金项目:华中农业大学国家级大学生创新创业训练计划资助项目(1210504011);华中农业大学大学生科技创新基金资助项目(11039)
作者单位
万鹏 华中农业大学 
赵伟松 华中农业大学 
龙超 华中农业大学 
蹇在庆 华中农业大学 
中文摘要:以湖北省仙桃市产青皮甘蔗为试验材料,利用自制的刃口为15°的刀片和夹具在微机控制电子万能试验机上对青皮甘蔗茎秆节间和节点处去皮及切断特性进行了试验研究。试验结果表明:在对甘蔗茎秆的节间进行去皮时,刀片载荷呈现先增加后降低的变化趋势;在对甘蔗茎秆的节点进行去皮时,刀片载荷呈现先增加后降低再增加后降低的变化趋势;对甘蔗茎秆的节间和节点进行切断试验时,刀片载荷均呈增加的变化趋势。
Wan Peng  Zhao Weisong  Long Chao  Jian Zaiqing
Huazhong Agricultural University;Huazhong Agricultural University;Huazhong Agricultural University;Huazhong Agricultural University
Key Words:Sugarcane  Peeling  Cutting  Machine characteristics
Abstract:The green-skinned sugarcane from Xiantao city in Hubei province was used as the test material. The peeling and cutting characteristics in the internode and node of the green-skinned sugarcane on the computer control electronic universal testing machine was studied with the home-made blade of 15° angle and the fixture. The test results showed that, when peeling the internode part of the sugarcane stalk, the blade load first increased and then decreased. When peeling the node part of the sugarcane stalk, the blade load first increased and then decreased, but it soon increased again and decreased after. When cutting off the internode and node parts of the sugarcane stalk, blade load showed an increasing trend.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器