陈玉仑,丁为民,杨宏图,丁启朔,汪小旵.墒沟集草型稻麦联合收获机设计与试验[J].农业机械学报,2012,43(Z1):73-78.
Chen Yulun,Ding Weimin,Yang Hongtu,Ding Qishuo,Wang Xiaochan.Design and Experiment of Combine Harvester with Function of Stalk-discharging to Ditch[J].Transactions of the Chinese Society for Agricultural Machinery,2012,43(Z1):73-78.
摘要点击次数: 2734
全文下载次数: 1446
墒沟集草型稻麦联合收获机设计与试验   [下载全文]
Design and Experiment of Combine Harvester with Function of Stalk-discharging to Ditch   [Download Pdf][in English]
  
DOI:10.6041/j.issn.1000-1298.2012.S0.015
中文关键词:  墒沟集草  联合收获机  开沟
基金项目:国家自然科学基金资助项目(50875131);江苏省科技支撑计划资助项目(BE2008315);江苏省农机三项工程资助项目(NJ2006—41);南京农业大学工学院引进人才基金资助项目(RCQD11—04)
作者单位
陈玉仑 南京农业大学 
丁为民 南京农业大学 
杨宏图 南京农业大学 
丁启朔 南京农业大学 
汪小旵 南京农业大学 
中文摘要:在现有全喂入式稻麦联合收获机上,采用技术集成的方法,重新配套动力,加装开沟、导草及其传动等装置,设计了墒沟集草型稻麦联合收获机。试验表明,该机设计方案可行,作业质量稳定,平均作业速度可达0.8m/s,作业效率0.27hm2/h,秸秆入沟率不小于95%,能一次完成稻麦联合收获、墒沟开挖、秸秆集沟还田作业。
Chen Yulun  Ding Weimin  Yang Hongtu  Ding Qishuo  Wang Xiaochan
Nanjing Agricultural University;Nanjing Agricultural University;Nanjing Agricultural University;Nanjing Agricultural University;Nanjing Agricultural University
Key Words:Stalk-discharging to ditch  Combine harvester  Ditch
Abstract:A multifunctional machine with functions of ditching and stalk-disposing while harvesting was developed. Field tests results showed that the mean working velocity and efficiency of the machine were about 0.8m/s and 0.27hm2/h. The ratio of stalk discharged to ditch was up to 95%. The field operation of harvesting, ditching and stalk-disposing was complete in one time.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器