压电共振型隔膜气泵设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51175213、50977037)和常州市自然科学基金资助项目(CJ20115014)


Design of Piezoelectric Resonant Diaphragm Air Pump
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    提出了一种利用系统共振原理的压电共振型隔膜气泵。分析了共振泵的工作原理,建立了共振泵的动力学模型,通过计算获得影响共振泵输出流量的主要因素。设计了共振泵样机,使用激光测微仪测得隔膜片的放大位移约是同一支撑条件下的压电振子位移的5.3倍,设计了测量共振泵输出流量的实验装置。通过实验测试得到在不同的振动弹簧刚度、调整弹簧片刚度和隔膜片刚度下输出流量及其相应的变化规律。实验测试表明:在输入电压为150 V、振动弹簧片厚度为0.6 mm、调整弹簧片厚度为1.4 mm、刚性传振活塞与隔膜片半径比为0.5和共振频率为230 Hz时,输出流量可以达到1650 mL/min。

    Abstract:

    A kind of piezoelectric resonant diaphragm air pump was proposed, which is based on the system resonant principle. Firstly, the working principle of the piezoelectric resonant diaphragm air pump was analyzed and a dynamic model of the pump resonance was established. The main factors of the output flow rate can be obtained. Then a prototype was designed. The testing facility was developed to measure the volume of the resonance pump. Finally, the variation of output flow rate on different vibrating spring rate, adjusting spring rate and diaphragm rate were obtained by experiment test. Experimental results indicated that the maximum flow rate was 1650 mL/min when he sinusoidal AC driving voltage was 150 V, the vibrating spring thickness was 0.6 mm, the adjusting spring thickness was 1.4 mm, and the radius ratio of the rigidity transfer vibration piston and the diaphragm was 0.5. And the amplification factor of the piezoelectric vibrator was 5.3 by using the proposed photovoltaic displacement sensor. 

    参考文献
    相似文献
    引证文献
引用本文

谢海峰,接勐,康晓涛,杨志刚,王龙.压电共振型隔膜气泵设计[J].农业机械学报,2012,43(12):246-250.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2012-12-13
  • 出版日期: