杨军虎,郭斌,王玥,张云周,孟瑞锋,王晓晖.无过载离心泵设计参数与性能关系研究[J].农业机械学报,2012,43(11):119-122,128.
Yang Junhu,Guo Bin,Wang Yue,Zhang Yunzhou,Meng Ruifeng,Wang Xiaohui.Relationship of Performances and Design Parameters for Non-overload Centrifugal Pumps[J].Transactions of the Chinese Society for Agricultural Machinery,2012,43(11):119-122,128.
摘要点击次数: 3642
全文下载次数: 1675
无过载离心泵设计参数与性能关系研究   [下载全文]
Relationship of Performances and Design Parameters for Non-overload Centrifugal Pumps   [Download Pdf][in English]
  
DOI:10.6041/j.issn.1000-1298.2012.11.022
中文关键词:  离心泵  无过载  功率备用系数  设计参数
基金项目:国家自然科学基金资助项目(51169010);“十二五”国家科技支撑计划资助项目(2012BAA08B05)
作者单位
杨军虎 兰州理工大学 
郭斌 兰州理工大学 
王玥 兰州理工大学 
张云周 兰州理工大学 
孟瑞锋 兰州理工大学 
王晓晖 兰州理工大学 
中文摘要:根据无过载离心泵最大轴功率与额定轴功率比值(功率备用系数K)公式,通过推导,将K表示成仅与比转数、叶片出口角和叶片数相关的函数,以此函数给出了K的三维曲面以及在不同叶片数下K关于叶片出口角和泵比转数的等高线。K和叶片数关系不大,叶片出口角、泵比转数对K影响较大;在相同的K下,比转数越高,可取的最大叶片出口角越大。由等高线图可以根据比转数、K选择合理的叶片出口角。实例证明,该方法能够快捷实现无过载离心泵设计,避免了传统方法叶片出口角选择的盲目性。
Yang Junhu  Guo Bin  Wang Yue  Zhang Yunzhou  Meng Ruifeng  Wang Xiaohui
Lanzhou University of Technology;Lanzhou University of Technology;Lanzhou University of Technology;Lanzhou University of Technology;Lanzhou University of Technology;Lanzhou University of Technology
Key Words:Centrifugal pump  Non-overload  Power spare coefficient  Design parameter
Abstract:According to the formula of the ratio K of the maximal axle power to the rated axle power of the non-overload centrifugal pumps, K was expressed as the function of specific speed, impeller outlet angle and number of blades by calculating the formula. The three-dimensional image of K and contours about specific speed and impeller outlet angle of K under different numbers of blades were drawn based on the function. K is not close to the number of blades; while the impeller outlet angle and specific speed have a greater effect on K . Under the same K , the higher the specific speed was, the bigger the impeller outlet angle would be. Reasonable impeller outlet angle can be chosen according to the specific speed and K from the contours. The example showed that the method can make the design of non-overload centrifugal pumps successfully and quickly, and can avoid the blindness in choosing the impeller outlet angle with the traditional method.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器