袁野,李国岫,李洪萌.进气涡流与油束夹角对柴油机燃烧性能的影响[J].农业机械学报,2012,43(11):1-6.
Yuan Ye,Li Guoxiu,Li Hongmeng.Effects of Intake Swirl and Spray Angle on Combustion Performance for Diesel Engine[J].Transactions of the Chinese Society for Agricultural Machinery,2012,43(11):1-6.
摘要点击次数: 3397
全文下载次数: 1706
进气涡流与油束夹角对柴油机燃烧性能的影响   [下载全文]
Effects of Intake Swirl and Spray Angle on Combustion Performance for Diesel Engine   [Download Pdf][in English]
  
DOI:10.6041/j.issn.1000-1298.2012.11.001
中文关键词:  柴油机  喷油系统  进气系统  交互作用
基金项目:国家自然科学基金资助项目(51076008);中央高校基本科研业务费专项资金资助项目(M11JB00300)
作者单位
袁野 北京交通大学 
李国岫 北京交通大学 
李洪萌 北京交通大学 
中文摘要:进气涡流与喷孔结构对柴油机缸内混合气分布有着决定性的影响,通过合理匹配二者可以优化缸内燃烧过程,从而获得更好的性能。对某小型高强化柴油机燃烧系统进行了多维仿真研究,综合分析了进气涡流与油束夹角的交互作用对缸内混合气分布、燃油蒸发、油气混合以及放热过程的影响机理,得到了二者对该机型的优化匹配准则。结果表明:增大和减小进气涡流和油束夹角可以分别增加上止点前后的燃油蒸发速率;涡流可以加速油气混合过程,而油束夹角过大则会减缓喷油中后期的油气混合速率;涡流比与油束夹角匹配得当时,缸内的混合气更均匀、索特平均直径更小,从而可以显著优化预混燃烧过程。
Yuan Ye  Li Guoxiu  Li Hongmeng
Beijing Jiaotong University;Beijing Jiaotong University;Beijing Jiaotong University
Key Words:Diesel engine  Fuel injection system  Intake system  Interaction
Abstract:Multi-dimensional simulation was conducted on a small high intensified diesel engine. The influence mechanism of the interaction of intake swirl and spray angle on the in-cylinder mixture distribution, fuel evaporation, mixing and heat release processes was analyzed. Optimum matching criteria was finally acquired. The results showed that increasing and decreasing the intake swirl and spray angle could accelerate the fuel evaporation rate before and after TDC respectively. Swirl could accelerate the process of mixing fuel and air, but if spray angle was too large, the mixing rate in the later part of injection could be retarded. When the swirl ratio and spray angle were matched appropriately, the mixture would be more uniform and the SMD would be smaller, which could significantly optimize the premixed combustion process.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器