王文明,王春光.弹齿滚筒式捡拾装置参数分析与仿真[J].农业机械学报,2012,43(10):82-89.
Wang Wenming,Wang Chunguang.Parameter Analysis and Simulation of Spring-finger Cylinder Pickup Collector[J].Transactions of the Chinese Society for Agricultural Machinery,2012,43(10):82-89.
摘要点击次数: 3668
全文下载次数: 1947
弹齿滚筒式捡拾装置参数分析与仿真   [下载全文]
Parameter Analysis and Simulation of Spring-finger Cylinder Pickup Collector   [Download Pdf][in English]
  
DOI:10.6041/j.issn.1000-1298.2012.10.015
中文关键词:  滚筒捡拾装置  弹齿  参数分析  仿真
基金项目:国家自然科学基金资助项目(50865005)
作者单位
王文明 内蒙古农业大学
邢台职业技术学院 
王春光 内蒙古农业大学 
中文摘要:对弹齿滚筒式捡拾装置的工作过程进行了理论分析与运动仿真研究。应用ADAMS建立了捡拾装置模型,通过运动学分析对捡拾装置的相关设计参数进行了改进设计,得出了影响因素变化时对弹齿运动状态的影响规律和弹齿滚筒式捡拾装置合理的凸轮盘滑道廓线设计方法,以及一定结构参数下捡拾装置的最优工作参数匹配,并与试验台试验进行了比较。结果表明,仿真分析结果与试验结果基本一致,证明了采用仿真分析捡拾装置工作过程的可行性。
Wang Wenming  Wang Chunguang
Inner Mongolia Agricultural University; Xingtai Polytechnic College;Inner Mongolia Agricultural University
Key Words:Cylinder pickup collector, Spring-finger, Parameter analysis, Simulation
Abstract:Theoretical analysis and kinematics simulation for study of the working process of spring-finger cylinder pickup collector were carried out. A modern designing theory was introduced and ADAMS model was established for the pickup collector. By going through kinetics analysis, the essential design parameters of pickup collector were improved. Based on the achievement, the affecting law of the variation of each factor to the moving state of spring-finger and the appropriate design method of slide track cam were acquired. Working parameters of cylinder pickup collector at given structure parameters were found. It showed that the analytical results of simulation were good agreed with the experiment results. This result showed the feasibility of using simulation method to analyze the performance of the cylinder pickup collector.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器