高焕文,何明,蒋金琳,房全孝.保护性耕作机械化种植模式与播量试验[J].农业机械学报,2012,43(8):42-45,70.
Gao Huanwen,He Ming,Jiang Jinlin,Fang Quanxiao.Experiment of Mechanized Planting Mode and Sowing Rate for Conservation Tillage[J].Transactions of the Chinese Society for Agricultural Machinery,2012,43(8):42-45,70.
摘要点击次数: 3932
全文下载次数: 1512
保护性耕作机械化种植模式与播量试验   [下载全文]
Experiment of Mechanized Planting Mode and Sowing Rate for Conservation Tillage   [Download Pdf][in English]
  
DOI:10.6041/j.issn.1000-1298.2012.08.008
中文关键词:  保护性耕作  播种行距  播种量  机械化农业试验
基金项目:农业部保护性耕作创新项目(2009)
作者单位
高焕文 中国农业大学 
何明 青岛市农业机械管理局 
蒋金琳 青岛农业大学 
房全孝 青岛农业大学 
中文摘要:2009—2011年在青岛开展了保护性耕作机械化种植模式与播量试验。试验表明两者对产量均有显著影响,小宽窄行模式(28 cm+12 cm)小麦产量最高,分别比大宽窄行和大等行距模式高15%~30%;加大10%~20%的播量,产量提高2.2%~15%,并分析了小宽窄行模式增产和大宽窄行模式产量不高的原因。
Gao Huanwen  He Ming  Jiang Jinlin  Fang Quanxiao
China Agricultural University;Qingdao Farm Machinery Bureau;Qingdao Agricultural University;Qingdao Agricultural University
Key Words:Conservation tillage, Plant row spacing, Sow rate, Mechanized agriculture experiment
Abstract:Mechanized planting mode and sowing rate was conducted in Qingdao from 2009 to 2011. The result showed that both of the two factors had significant influence on wheat yields. The wheat yields in small-wide-narrow mode (28cm+12cm) was the highest, which is 15%~30% higher than the large-wide-narrow mode and large-equal-row mode. When the sowing rate increased by 10%~20%, the yield increased by 2.2%~15%. The reason of yield increasing in small-wide-narrow mode and yield decreasing in large-wide-narrow mode was analyzed. 

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器