周岭,施卫东,陆伟刚,李振同,李伟.深井离心泵轴向力数值预测与试验[J].农业机械学报,2012,43(7):100-103,140.
Zhou Ling,Shi Weidong,Lu Weigang,Li Zhentong,Li Wei.Numerical Prediction and Experiment of Axial Force on Deep-well Centrifugal Pump[J].Transactions of the Chinese Society for Agricultural Machinery,2012,43(7):100-103,140.
摘要点击次数: 3861
全文下载次数: 1661
深井离心泵轴向力数值预测与试验   [下载全文]
Numerical Prediction and Experiment of Axial Force on Deep-well Centrifugal Pump   [Download Pdf][in English]
  
DOI:10.6041/j.issn.1000-1298.2012.07.018
中文关键词:  深井离心泵  轴向力  数值模拟  试验
基金项目:江苏省自然科学基金资助项目(BK2011505);江苏省普通高校研究生科研创新计划资助项目(CXZZ—0566);浙江省重大科技专项重大工业项目(2010C01032);江苏高校优势学科建设工程资助项目
作者单位
周岭 江苏大学 
施卫东 江苏大学 
陆伟刚 江苏大学 
李振同 台州佳迪泵业有限公司 
李伟 江苏大学 
中文摘要:轴向力的预测和平衡是多级泵设计和优化中的重点和难点。以150QJ20型深井离心泵为例,在Fluent中采用标准k—ε湍流模型、SIMPLEC算法、二阶迎风方程,对包含叶轮、导叶在内的两级深井离心泵进行了全流场数值计算,对不同工况下的泵效率、单级扬程和单级轴向力进行了预测。随后对样机进行了外特性和轴向力的试验测量。将数值模拟结果与试验结果对比,分析了预测值与试验值的差异,结果表明利用数值模拟方法可以较为准确地预测深井离心泵的外特性和轴向力。
Zhou Ling  Shi Weidong  Lu Weigang  Li Zhentong  Li Wei
Jiangsu University;Jiangsu University;Jiangsu University;Taizhou Jiadi Pump Industry Co., Ltd.;Jiangsu University
Key Words:Deep-well centrifugal pump  Axial force  Numerical simulation  Experiment
Abstract:The forecast and balance of axial force is the key and difficult aspect in the design of multistage pump.150QJ20 type deep-well centrifugal pump was chosen as an example; the whole flow field of two-stage deep-well centrifugal pump was simulated in Fluent by the standard k—εturbulence model, SIMPLEC algorithm and second-order upwind scheme. The pump efficiency, single-stage head and single-stage axial force at different operating points were obtained by numerical simulations. The external performance and axial force of the prototype pump were tested by the experiments. The difference between numerical results and the experimental result were compared and analyzed. The results indicated that the numerical methods could accurately forecast the pump performance and axial force.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器