廖庆喜,张宁,张朋玲,杨波.一器多行离心式油菜排种器[J].农业机械学报,2012,43(2):48-51,95.
Liao Qingxi,Zhang Ning,Zhang Pengling,Yang Bo.Centrifugal Metering Device for Rapeseed[J].Transactions of the Chinese Society for Agricultural Machinery,2012,43(2):48-51,95.
摘要点击次数: 4419
全文下载次数: 2160
一器多行离心式油菜排种器   [下载全文]
Centrifugal Metering Device for Rapeseed   [Download Pdf][in English]
  
DOI:10.6041/j.issn.1000-1298.2012.02.010
中文关键词:  油菜  排种器  离心式
基金项目:高等学校博士学科点专项科研基金资助项目(20090146110016)、国家油菜产业技术体系专项资助项目(CARS-13)和中央高校基本科研业务费资助项目(2011PY021)
作者单位
廖庆喜 华中农业大学 
张宁 华中农业大学 
张朋玲 华中农业大学 
杨波 华中农业大学 
中文摘要:设计了一种适用于油菜一器多行排种的离心式排种器,分析了离心式油菜排种器的工作原理,确定了排种器的主要结构和性能参数。研究了排种器锥筒转速与排量、各行排量一致性、总排量稳定性、破碎率等的关系;正交试验表明,在排种器锥筒转速为150 r/min、出种孔直径为3.2 mm、出种孔倾角为15°时,单行播量稳定性变异系数最小,为2.38%,播种均匀性变异系数为18.2%。
Liao Qingxi  Zhang Ning  Zhang Pengling  Yang Bo
Huazhong Agricultural University;Huazhong Agricultural University;Huazhong Agricultural University;Huazhong Agricultural University
Key Words:Rapeseed, Metering device, Centrifugal
Abstract:A centrifugal metering device was designed for rapeseed. Working principle of the centrifugal metering device was analyzed, and its main structural and performance parameters were investigated. The relationship among rotation speed with the delivery capacity, coefficient of variation, stability of total displacement and damage rate was concluded through the captive test of seeding device. The experimental results showed that the rotating speed was 150 r/min,the diameter of discharge holes was 3.2 mm, the tilt angle of discharge holes was 15°, the delivery coefficient of variation was 2.38% and performance test of the device on the rack demonstrated that seeding uniformity coefficient of variation was 18.2%.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器