吴崇友,丁为民,石磊,王利强,金诚谦.油菜分段收获捡拾脱粒机捡拾损失响应面分析[J].农业机械学报,2011,42(8):89-93.
Wu Chongyou,Ding Weimin,Shi Lei,Wang Liqiang,Jin Chengqian.Response Surface Analysis of Pickup Losses in Two-stage Harvesting for Rapeseed[J].Transactions of the Chinese Society for Agricultural Machinery,2011,42(8):89-93.
摘要点击次数: 3220
全文下载次数: 1639
油菜分段收获捡拾脱粒机捡拾损失响应面分析   [下载全文]
Response Surface Analysis of Pickup Losses in Two-stage Harvesting for Rapeseed   [Download Pdf][in English]
  
DOI:10.3969/j.issn.1000-1298.[year].[issue].[sequence]
中文关键词:  油菜  分段收获  捡拾脱粒机  损失率  响应面分析
基金项目:“十一五”国家科技支撑计划资助项目(2010BAD01B06);公益性行业(农业)科研专项经费项目(nyhyzx07—058)
作者单位
吴崇友 农业部南京农业机械化研究所
南京农业大学 
丁为民 南京农业大学 
石磊 农业部南京农业机械化研究所 
王利强 江南大学 
金诚谦 农业部南京农业机械化研究所 
中文摘要:为降低捡拾脱粒机捡拾损失,采用响应面分析方法对捡拾部件的参数进行试验。试验结果和分析表明:影响捡拾损失的重要因素是机组前进速度、输送带速和输送倾角;3个影响因素按重要性排序为:机组作业速度、输送带速、输送倾角。确定了一组最优的参数组合:机组前进速度0.80m/s,输送带速0.78m/s,输送倾角11.19°,优化后捡拾损失率的理论值为2.91%。考虑实际机械作业过程中的参数调整问题,推荐参数组合为:机组前进速度0.71m/s,输送带速0.80m/s,输送倾角12°。
Wu Chongyou  Ding Weimin  Shi Lei  Wang Liqiang  Jin Chengqian
Nanjing Research Institute of Agricultural Mechanization, Ministry of Agriculture;Nanjing Agricultural University;Nanjing Agricultural University;Nanjing Research Institute of Agricultural Mechanization, Ministry of Agriculture;Jiangnan University;Nanjing Research Institute of Agricultural Mechanization, Ministry of Agriculture
Key Words:Rapeseed  Two-stage harvesting  Pickup thresher  Loss  Response surface analysis
Abstract:In order to reduce the loss rate in picking up, parameters of pickup device with response surface analysis methods was studied. The results showed that main factors of impacting pickup loss rate were the moving speed, belt speed and conveyor inclination. The three factors gradation of importance was the moving speed, belt speed and conveyor inclination. Optimal group of parameters was the moving speed of 0.80m/s, the belt speed of 0.78m/s,the conveyor inclination of 11.19°, the optimal loss rate of 2.91%. Considering of parameters adjusting in actual conditions, recommended parameters were that the moving speed of 0.71m/s, the belt speed of 0.80m/s, the conveyor inclination of 12°.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器