吴伟光,马履中,杨启志,陈修祥.车辆并联机构座椅三维减振研究[J].农业机械学报,2011,42(6):23-27.
Wu Weiguang,Ma Lüzhong,Yang Qizhi,Chen Xiuxiang.3-D Vibration Isolation of Vehicle Seat Based on Parallel Mechanism[J].Transactions of the Chinese Society for Agricultural Machinery,2011,42(6):23-27.
摘要点击次数: 3332
全文下载次数: 1631
车辆并联机构座椅三维减振研究   [下载全文]
3-D Vibration Isolation of Vehicle Seat Based on Parallel Mechanism   [Download Pdf][in English]
  
DOI:10.3969/j.issn.1000-1298.[year].[issue].[sequence]
中文关键词:  车辆  座椅  三维减振  并联机构  模态  灵敏度
基金项目:国家自然科学基金资助项目(50905077);江苏省博士后科研基金资助项目(0901010B)
作者单位
吴伟光 江苏大学 
马履中 江苏大学 
杨启志 江苏大学 
陈修祥 江苏大学 
中文摘要:针对车辆座椅的三维振动,提出采用三平移并联机构作为其主体机构,运动学分析表明在垂直方向具有较大的工作空间,且机构的Jacobian矩阵与垂直位移无关,适合作为车辆三维减振座椅。机构的模态分析结果表明,系统的3个固有频率避开了人体的敏感频率,可以使人体具有较好的乘坐舒适度。最后对系统进行了动态灵敏度分析,确定了系统设计参数对座椅固有频率的影响情况,更好地满足了车辆对座椅动态特性的要求。
Wu Weiguang  Ma Lüzhong  Yang Qizhi  Chen Xiuxiang
Jiangsu University;Jiangsu University;Jiangsu University;Jiangsu University
Key Words:Vehicle  Seat  3-D vibration isolation  Parallel mechanism  Mode  Sensitivity
Abstract:A 3-D parallel mechanism was designed to solve the problem of 3-D vibration isolation of vehicle seat. The kinematic analysis of the platform indicated that there was big workspace in vertical direction. The Jacobian matrix was not relative to the vertical displacement, so the parallel mechanism met the need of 3-D vibration isolation of vehicle seat. The results of mode analysis showed that three natural frequency of the 3-D vibration isolation system could avoid the sensitive frequency of body, and the dynamic sensitivity analysis for the 3-D vibration isolation system discovered the influences of the design parameter to the natural frequency.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器