伏军,龚金科,吴钢,余明果,吁璇,张文强.喷油助燃再生DPF过滤体入口废气温度条件研究[J].农业机械学报,2011,42(3):1-5,10.
Fu Jun,Gong Jinke,Wu Gang,Yu Mingguo,Yu Xuan,Zhang Wenqiang.Inlet Exhaust Gas Temperature Condition for a Burner-type DPF at the Low and Moderate Load Steady State[J].Transactions of the Chinese Society for Agricultural Machinery,2011,42(3):1-5,10.
摘要点击次数: 3539
全文下载次数: 2212
喷油助燃再生DPF过滤体入口废气温度条件研究   [下载全文]
Inlet Exhaust Gas Temperature Condition for a Burner-type DPF at the Low and Moderate Load Steady State   [Download Pdf][in English]
  
DOI:10.3969/j.issn.1000-1298.[year].[issue].[sequence]
中文关键词:  柴油机  微粒捕集器  再生  入口废气温度 
基金项目:国家自然科学基金资助项目(50876027)和湖南省教育厅资助项目(08C797)
作者单位
伏军 湖南大学
邵阳学院 
龚金科 湖南大学 
吴钢 湖南大学 
余明果 湖南大学 
吁璇 湖南大学 
张文强 湖南大学 
中文摘要:阐述了DPF喷油助燃再生的工作原理,在考虑过滤体内沉积微粒氧化反应次模型的基础上,以壁流式蜂窝陶瓷过滤体为研究对象,建立柴油机稳态工况下过滤体入口孔道的再生简化模型。考虑到柴油机中小负荷排气富氧条件,通过无量纲化,结合DPF的排气背压模型,得到了喷油助燃再生DPF时过滤体入口端所需的温度条件。试验表明,以该条件获得的理论过滤体入口废气温度所对应的喷油率来调节燃烧器功率可顺利实现DPF的再生过程,为DPF喷油助燃再生系统的设计提供了一定的理论依据。
Fu Jun  Gong Jinke  Wu Gang  Yu Mingguo  Yu Xuan  Zhang Wenqiang
Hunan University;Shaoyang University;Hunan University;Hunan University;Hunan University;Hunan University;Hunan University
Key Words:Diesel engine, Diesel particulate filter(DPF), Regeneration, Inlet exhaust temperature
Abstract:The operation principle of a burner-type diesel particulate filter was presented. Taking the subordinate oxidation reaction model into consideration, and taking the honeycomb wall-flow ceramic monolith filter as a research object, the simplified regeneration model in the single inlet channel of the filter was built at the steady state of the diesel engine. Based on the non-dimensionalization and the exhaust back-pressure model of DPF, the required temperature condition of the inlet exhaust for the burner-type DPF was obtained. The tests showed that the DPF regeneration could be smoothly completed by the burner power adjustment according to the oil spray rate correspond to the theoretical inlet exhaust temperature. It provided a definite theory basis to the design of the burner-type DPF.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器