张涛,陈次昌,郭清.含沙水流中翼型空蚀磨损试验[J].农业机械学报,2010,41(11):31-37.
.Experiment on Damage of Cavitation and Silt Abrasion for Hydrofoil in Silt-laden Water Flow[J].Transactions of the Chinese Society for Agricultural Machinery,2010,41(11):31-37.
摘要点击次数: 2490
全文下载次数: 1373
含沙水流中翼型空蚀磨损试验   [下载全文]
Experiment on Damage of Cavitation and Silt Abrasion for Hydrofoil in Silt-laden Water Flow   [Download Pdf][in English]
  
DOI:10.3969/j.issn.1000-1298.[year].[issue].[sequence]
中文关键词:  翼型  含沙水流  空蚀  磨损  微观形貌
基金项目:
张涛  陈次昌  郭清
西南石油大学
中文摘要:模拟水力机械内部流动环境,在收缩-扩散型试验段中对翼型进行了空蚀、磨损及两者联合作用破坏试验,观测表面破坏微观形貌并测量破坏深度分布规律。空蚀形貌呈较为规则的近圆独立蚀坑,其分布较为随机。根据颗粒对表面作用的不同,磨损形貌表现为冲击、铲削、犁耕及切削等类型。在较高固相质量浓度下,联合作用破坏形貌大多在极端的角度(90°或0°)以颗粒磨损形式出现,其尺度特征在翼型表面随位置后移远大于磨损形貌,宏观破坏深度明显比单纯磨损大;而在低固相质量浓度下,微观形貌为空蚀磨损共存。
Key Words:
Abstract:With the simulation of the flow in hydraulic machinery, experiments of cavitation, silt abrasion and their synergism on hydrofoil in the converging-diverging testing section were performed, and microscopic appearance along the damage surface was observed and depth distribution of damage was measured. The cavitation appearance shows like normal approximate round, and distributes randomly. According to the difference of action parameter on surface, silt abrasion appearance registers as wedging,relieving,ploughing, and cutting, etc. On the high particle content, the appearance of synergism mostly appears as particle wear in extreme angles (90° or 0°), and scale character on hydrofoil surface becomes more and more large than silt abrasion appearance along the position, and the depth of macro-damage is obviously bigger than single wear. On the low particle content, the microstructure probably appears as the coexistence of cavitation and silt abrasion.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器