李波,李云清,王德福.高压涡旋喷油器喷雾撞壁机理研究[J].农业机械学报,2010,41(9):18-21.
.Characteristic of GDI High-pressure Swirl Injector[J].Transactions of the Chinese Society for Agricultural Machinery,2010,41(9):18-21.
摘要点击次数: 2553
全文下载次数: 1332
高压涡旋喷油器喷雾撞壁机理研究   [下载全文]
Characteristic of GDI High-pressure Swirl Injector   [Download Pdf][in English]
  
DOI:10.3969/j.issn.1000-1298.[year].[issue].[sequence]
中文关键词:  汽油缸内直喷  高压涡旋喷油器  喷雾撞壁  机理
基金项目:
李波  李云清  王德福
北京航空航天大学
中文摘要:为了研究直喷式汽油机高压涡旋喷油器喷雾撞壁机理,测量了撞壁喷雾的高度、喷雾半径及喷雾远端速度,分析了不同喷射压力、环境背压、喷嘴到壁面的距离、壁面倾角等因素对撞壁喷雾的影响。随着喷射压力、喷嘴到壁面的距离及壁面倾角的增加,喷雾的贯穿距离增大;环境背压的增大导致喷雾的贯穿距离减小。较高的喷射压力和较低的环境背压增大了撞壁燃油与壁面的接触面积,在壁面上形成的薄膜加速了燃油的蒸发。由经验公式计算得到的撞壁喷雾贯穿距离与试验测量值在一定范围内具有一致性,为燃烧室的设计、进气道形式的选取、喷油器和火花塞的布局提供了试验依据。
Key Words:
Abstract:The characteristics of gasoline spray after wall impingement from a high-pressure gasoline direct injection injector were investigated. To examine the effects of various factors on the impingement development, experiments were conducted at different injection pressures, ambient pressures, wall distances and angles. The impinging spray development, spray height, spray radius, and spray growth rate were measured. Experimental results show that the spray penetration increases with the increase of injection pressure, wall distance and angle. The penetration decreases with the increase of ambient pressure. High injection pressure and low ambient pressure increased the fuel contact area and accelerated the evaporation. The predicted penetrations with the empirical equations in all cases agree with measurements, to a certain extent.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器