周佳,邓鸿英,张华军,张生昌,郑水华,李海山.内环流活塞泵转子型线及运动仿真[J].农业机械学报,2010,41(5):72-75.
. Research and Motion Simulation Analysis of the Rotor Profile on the Inside Circulation Piston Pump[J].Transactions of the Chinese Society for Agricultural Machinery,2010,41(5):72-75.
摘要点击次数: 2740
全文下载次数: 1747
内环流活塞泵转子型线及运动仿真   [下载全文]
Research and Motion Simulation Analysis of the Rotor Profile on the Inside Circulation Piston Pump   [Download Pdf][in English]
  
DOI:10.3969/j.issn.1000-1298.[year].[issue].[sequence]
中文关键词:  内环流活塞泵  转子型线  设计  仿真
基金项目:
周佳  邓鸿英  张华军  张生昌  郑水华  李海山
浙江工业大学
中文摘要:以内环流活塞泵齿形型线为研究对象,对其啮合特性进行了研究。根据内环流活塞泵转子运动规律,基于内转子齿形型线为圆弧,建立动坐标系。假定外转子不动,内转子作相对运动,在国内首次推导出外转子齿形型线的计算式。通过实例计算及运动仿真分析,验证了齿形型线方程及计算公式的正确性。
Key Words:
Abstract:The tooth profile lines of the inside circulation piston pump were studied, and their meshing characteristics were analyzed. According to the motion law of the inside circulation piston pump rotor, and based on the tooth profile lines of the inside rotor as the circular arc, the moving coordinate system was established. Assumed that the outside rotor was fixed and the inside rotor made the relative movement, the calculation formula of the outside rotor profile was deduced for the first time. At last, using an actual design example and motion simulation analysis, the validity of the tooth profile line equation and calculation formula was verified. 

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器