单圆盘甘蔗切割器影响破头率的运动学仿真
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用有限元软件ANSYS对甘蔗切割进行有限元分析,制定了单圆盘甘蔗切割器切割甘蔗的坏切割状态判别标准,通过物理试验制定了刀盘压破蔗头的判别标准。利用动力学仿真分析软件ADAMS进行了切割器连续切割多根甘蔗的运动学仿真,定量研究了影响切割状态和压破蔗头的各因素及交互作用对破头率的影响机理。结果表明,小频率和小速比、小振幅和少刀片的组合有利于降低破头率,当频率、振幅为零,速比为24,倾角为15°,刀片数目为2片时破头率为

    Abstract:

    6.7%。Sugarcane cutting was analyzed with the currency finity cell analysis software ANSYS, and distinguish standard of single base cutter on the bad incision state has been worked out by means of finity cell. Through physical simulative experiment, distinguish standard of broken root by base cutter's pressing was formulated. Simulative kinematics analysis of cutting sugarcane continuously has been carried out by using the dynamics analysis software ADAMS, and the quantity study on affecting factors and interactive effect on the rate of broken biennial root was done. The results showed that the combination of low frequency and low speed ratio, low amplitude and few razor blades are beneficial in reducing the rate of broken biennial root. Under the combination of factors (amplitude and frequency is zero, speed ratio X1=24, obliquity of base cutter X4=15°, the number of razor blades X5=2), the rate of broken biennial root is 6.7%. 

    参考文献
    相似文献
    引证文献
引用本文

吕勇,杨坚,梁兆新,莫建霖,乔艳辉.单圆盘甘蔗切割器影响破头率的运动学仿真[J].农业机械学报,2008,39(4):50-55.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: