杨洪涛,费业泰,陈宝钢.长悬臂坐标测量机动态力引起的误差分析与控制[J].农业机械学报,2008,39(1):165-168.
.[J].Transactions of the Chinese Society for Agricultural Machinery,2008,39(1):165-168.
摘要点击次数: 2697
全文下载次数: 7
长悬臂坐标测量机动态力引起的误差分析与控制   [下载全文]
   [Download Pdf][in English]
  
DOI:10.3969/j.issn.1000-1298.[year].[issue].[sequence]
中文关键词:  坐标测量机  长悬臂  动态力  误差  控制
基金项目:
杨洪涛  费业泰  陈宝钢
安徽理工大学
中文摘要:根据长悬臂测量机具有长悬臂和弱刚度的特性,分析了测量机动态力的来源,研究了动态力对测量机测量误差的影响和测头附加动态误差的来源,得出测量机测头附加动态误差具有三维特性,各个方向附加动态误差与3个方向导轨系统振动特性有关。推导了悬臂测杆系统振动数学模型,根据该模型采取了相应的动态力控制措施,实验结果证明了所采取控制措施的有效性。
Key Words:
Abstract: According to the long cantilever and non-rigid characteristic of long cantilever coordinate measuring machine, the detailed analysis on the dynamic forces sources of the measuring machine was studied. The influences of the dynamic forces on the measuring error of CMM, and the additive dynamic error sources of the probe were investigated respectively. The conclusions that the additive dynamic error of the CMM probe had three-dimension character and the additive dynamic error in each dimension related to the vibration characteristic of the guide strip system were obtained. The mathematics model of vibration in the group system composed by the cantilever and the measuring staff was deduced subsequently. Based on the model, the corresponding means was adopted to control the vibration. The experimental results proved that the control means is valid and suitable.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器