刘伟民,张鹏程,徐圣言.旋转导向管喷动床干燥油菜籽的工艺优化[J].农业机械学报,2008,39(1):56-59.
.[J].Transactions of the Chinese Society for Agricultural Machinery,2008,39(1):56-59.
摘要点击次数: 3059
全文下载次数: 5
旋转导向管喷动床干燥油菜籽的工艺优化   [下载全文]
   [Download Pdf][in English]
  
DOI:10.3969/j.issn.1000-1298.[year].[issue].[sequence]
中文关键词:  喷动床  旋转导向管  油菜籽  干燥  优化
基金项目:
刘伟民  张鹏程  徐圣言
江苏大学
中文摘要:为研究旋转导向管喷动床的干燥性能,采用油菜籽为原料,进行干燥试验。选取风量、装料量、风温和导喷距等因素,范围分别为51~88m3/h(101.3 kPa, 0℃)、10~30kg、80~110℃和40~80mm,以水分耗热率为指标进行试验。根据单因素试验的结果,固定导喷距,按L9(34)正交试验方案进行优化试验。试验结果表明,优化工艺参数为标态风量58m3/h 、风温80℃、装料量20kg。优化工艺下的水分耗热率为3941.4kJ/kg,只有风量对水分耗热率有显著影响。用SPSS软件处理正交试验数据,得到了水分耗热率与风温、风量及加料量关系的回归方程。
Key Words:
Abstract: Rapeseeds drying in a spouted bed with rotating draft tube (RDTSB) was studied to obtain the dryer’s drying characteristics. Taking the heat consumption per kilogram water as the criterion, the 51~88m3/h air flow rate(101.3kPa, 0℃), 80~110℃ hot air temperature, 10~30kg rapeseed load quantity and 40~80mm distance between draft tube and spouted tube, the drying experiments were tested respectively. On the basis of these test results and the practical conditions, a scheme of orthogonal test with 3 factors and 3 levels was designed. The optimum drying parameters on the present apparatus were normal air flow rate at 58m3/h, hot air temperature at 80℃ and wet rapeseed load at 20kg. The optimum heat consumption per kilogram water was 3941.4kJ and the factor of air flow rate was significant only. By calculating with SPSS, the regression equation of heat consumption per kilogram water against hot air temperature, air flow rate and rapeseed load quantity was obtained.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器