周长峰,孙蓓蓓,陈南,张晓阳,孙庆鸿.车辆座椅悬架参数识别与优化设计[J].农业机械学报,2007,38(10):24-27.
.[J].Transactions of the Chinese Society for Agricultural Machinery,2007,38(10):24-27.
摘要点击次数: 2482
全文下载次数: 2
车辆座椅悬架参数识别与优化设计   [下载全文]
   [Download Pdf][in English]
  
DOI:10.3969/j.issn.1000-1298.[year].[issue].[sequence]
中文关键词:  车辆  座椅  悬架  优化  参数识别
基金项目:
周长峰  孙蓓蓓  陈南  张晓阳  孙庆鸿
山东交通学院
中文摘要:建立并求解座椅系统非线性动力学微分方程,以不同车速下座椅加速度均方根值仿真与试验结果的误差平方和最小为优化目标,基于约束随机优化算法反求并优化座椅悬架系统的非线性刚度和阻尼值。参数识别结果表明,原系统刚度和阻尼值不匹配是悬架减振效果差的主要原因,参数优化结果使座椅加速度均方根值降低了50%,改善了座椅的减振性能。根据最佳刚度特性曲线,借助有限元法设计出新型非线性座椅减振弹簧。
Key Words:
Abstract: The nonlinear dynamic differential equation of seat suspension system was built and solved with Runge-Kutta method. Taking the minimum sum of square errors of root-mean-square values of seat acceleration between simulation and test results as the objective function, the nonlinear stiffness and damping parameters of the system were identified and optimized with constraint random direct method. The identified results showed the original stiffness and damping parameters of the seat suspension were mismatched and weakened the attenuating vibration ability of the system. Using the optimized stiffness and damping parameters, the root-mean-square values of seat acceleration were brought down by 50%. To coincide with the optimized parameters, the new nonlinear rubber spring was developed with finite element method according to the ideal stiffness curve of seat suspension. So the analytical methods above have important reference value to identify and optimize the dynamic parameters of other vehicle suspension systems.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器