王霄,韩亚锋,林跃强,刘会霞,高传玉.Delta型并联运动激光切割机床的工作空间分析[J].农业机械学报,2007,38(1):154-157.
.[J].Transactions of the Chinese Society for Agricultural Machinery,2007,38(1):154-157.
摘要点击次数: 2692
全文下载次数: 8
Delta型并联运动激光切割机床的工作空间分析   [下载全文]
   [Download Pdf][in English]
  
DOI:10.3969/j.issn.1000-1298.[year].[issue].[sequence]
中文关键词:  激光切割机床  Delta并联机构  工作空间
基金项目:
王霄  韩亚锋  林跃强  刘会霞  高传玉
江苏大学
中文摘要:提出了一种基于Delta并联机构的新型激光切割机床。建立了三自由度Delta并联机构的反解方程和工作空间求解模型,分析了各支链子工作空间的几何形状及其内部出现空洞的条件,从而将工作空间解析归结为可达工作空间外部边界与内部空洞边界求解。采用几何分析与数值迭代相结合的方法,探索了工作空间每一区域的边界,得到了机构工作空间的完整描述。整个求解过程直观、简明,计算速度快。
Key Words:
Abstract: A new laser cutting manipulator based on Delta parallel robot is proposed. Inverse equations and even the inverse kinematics model of the three-degree-of-freedom Delta parallel structure are established. The geometric shape of each subchain's workspace is analyzed and how the interior hole is formed are discussed in the test, so the problem of workspace depends on the solution of outside boundary and interior hole boundary of workspace. Using the combined method between geometric algorithm and numerical iterative algorithm, the geometric contour of each subchain's workspace is taken into account and the boundary conditions of all the workspace region are discussed thoroughly. Through above analysis, the whole solution process is intuitional and concise, and the calculation speed is even faster.

Transactions of the Chinese Society for Agriculture Machinery (CSAM), in charged of China Association for Science and Technology (CAST), sponsored by CSAM and Chinese Academy of Agricultural Mechanization Science(CAAMS), started publication in 1957. It is the earliest interdisciplinary journal in Chinese which combines agricultural and engineering. It always closely grasps the development direction of agriculture engineering disciplines and the published papers represent the highest academic level of agriculture engineering in China. Currently, nearly 8,000 papers have been already published. There are around 3,000 papers contributed to the journal each year, but only around 600 of them will be accepted. Transactions of CSAM focuses on a wide range of agricultural machinery, irrigation, electronics, robotics, agro-products engineering, biological energy, agricultural structures and environment and more. Subjects in Transactions of the CSAM have been embodied by many internationally well-known index systems, such as: EI Compendex, CA, CSA, etc.

   下载PDF阅读器