HZSM—5催化提质焦油燃烧特性研究
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

公益性行业(农业)科研专项经费资助项目(20100306306)


Combustion Characteristic of Bio-tar by HZSM—5 Catalytic Upgrading
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用耐驰同步热重分析仪,对HZSM—5催化提质前后焦油的理论燃烧特性和动力学进行分析。结果表明,催化提质前、后焦油燃烧过程约分为4个阶段:轻质有机物挥发段、挥发分燃烧段、难挥发组分燃烧段和残留物燃烧阶段,原始焦油前2个阶段失重率约为75%,而提质焦油失重率约为90%。随着升温速率增加,提质焦油最大燃烧速率显著增加,燃烧稳定性明显提高。根据热重曲线计算动力学参数,提质焦油的活化能的变化与热重试验结果符合,明显降低。应用热红外对焦油的燃烧烟气进行燃烧过程分析,气体产物生成主要分为241~380℃、380~500℃和500~600℃3个阶段。

    Abstract:

    Combustion characteristics and kinetics of bio-tar before and after catalytic upgrading were studied on a thermogravimetric apparatus. The results showed that the combustion process was divided into four stages: light organics volatilization, volatilization content combustion, less volatilization content combustion and residue combustion. Weight loss in the first two stages of raw tar was about 75%, whereas that of tar after upgrading was about 90%. With the increasing heating rates, weight loss rate increased heavily along with significantly enhanced combustion stability. According to thermogravimetric curve calculation kinetic parameters, activation energy of upgrading tar was lowered and in agreement with that from TG analysis. The gas from combustion was analyzed by Fourier transform infrared spectroscopy method, which showed the gaseous products generated in three phases of 241~380℃, 380~500℃ and 500~600℃.

    参考文献
    相似文献
    引证文献
引用本文

蒋恩臣,赵创,王明峰,熊磊明. HZSM—5催化提质焦油燃烧特性研究[J].农业机械学报,2013,44(Supp1):138-142. Jiang Enchen, Zhao Chuang, Wang Mingfeng, Xiong Leiming. Combustion Characteristic of Bio-tar by HZSM—5 Catalytic Upgrading[J]. Transactions of the Chinese Society for Agricultural Machinery,2013,44(Supp1):138-142.

复制
相关视频

分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2013-10-22
  • 出版日期:
文章二维码